Transmission line printed using silver nanoparticle ink on FR-4 and polyimide substrates

Abstract

In this paper, nano-silver ink-jet printed transmission lines were fabricated to investigate RF performance on both flame retardant (FR-4) and polyimide (PI) as rigid and flexible substrates. The transmission lines were printed by using the ink-jet printer with velocity of 3.5 mm/s and were sintered in a convection oven with 250 °C. The RF performance of transmission lines was simulated and measured at low frequencies. The transmission loss is measured to be 0.22 dB@1 GHz and 0.32 dB@1 GHz, respectively, for the FR-4 and PI substrates, respectively. The return loss has over 16 dB for FR-4 substrate and over 12 dB for PI substrate. The RF performance of transmission line was investigated and discussed in regard to an influence by two substrates. The measured RF performance of fabricated transmission lines results in the possibility that flexible device is explored in low frequencies application.