Transparent Coating Systems Applied on Spruce Wood and Their Colour Stability on Exposure to an Accelerated Ageing Process

Abstract

The objective of this study was to investigate the colour stability of spruce wood surfaces treated with coating systems (CS) and exposed to accelerated ageing. The tested CSs were transparent and three-layered; the top layer was modified with ultraviolet (UV) absorbers, while the base layer was modified with lignin stabiliser. Spruce wood surfaces treated with unmodified CSs were not colour-stable during the accelerated ageing process, with the surface exhibiting colour change after just 100 ageing hours. Adding specific UV absorbers into the top layer and lignin stabiliser into the base layer significantly improved the colour stability of the surface-treated wood. In all cases, however, the colour variation associated with ongoing ageing was significant. An additional study task was to determine whether the discolouration of surface-treated wood is caused by the discolouration of the wood substrate alone or also by the CS discolouration. Consequently, there was also the examination of discolouration of the individual coating materials or coating systems applied to glass slides. This testing proved that in the case of wood surface-treated with CS, without lignin stabiliser, the discolouration was the same as that of the substrate, and this was true throughout the whole ageing process. In the case of wood surface-treated with CS, but with lignin stabiliser, there were, in some cases, significant differences in discolouration between surface-treated wood and the wood substrate. These variations were especially evident during the initial 300 ageing hours.