Understanding the effect of solid lubricants on scratch behavior in epoxy resins: An experimental and statistical approach

Abstract

Epoxy resins inherently have low resistance to scratching. To increase the scratch resistance of epoxy resins, reinforcing solid lubricants into the resin is an option. For this purpose, in this study, polytetrafluoroethylene (PTFE) and graphite were reinforced in two different epoxy resins (rigid and toughened) at different reinforcement ratios (5, 10, and 15 wt%). The effects of solid lubricant reinforcement on the scratch behavior of rigid and toughened epoxy resins were examined both experimentally and statistically. Scratch tests were performed throughout a distance of 10 mm using a test apparatus under a load of 15 N and a scratch speed of 30 mm/min. Following the scratch tests, the COF (Coefficient of Friction) values, scratch hardness, scratch width, and depth of all samples were determined and compared to neat epoxy for each resin. In general, it has been determined that solid lubricant reinforcement at higher reinforcement ratios has a positive effect on the COF value (15 wt%). In the case of 15 wt% graphite reinforced rigid and toughened epoxy, a decrease of 15.90% and 17.77%, respectively, was obtained in the COF value compared to the neat epoxy. After the scratch tests, statistical analysis was performed according to RSM to support the experimental results, and ANOVA tables were obtained.Highlights Epoxy adhesives exhibit low scratch resistance. Examining the impact of PTFE and graphite reinforcement on scratch behavior. Two types of epoxy and varied reinforcement ratios (5, 10, and 15 wt%) were studied. Solid lubricant reinforcement to epoxy positively affected scratch behavior.