The paper deals with the modeling of the technological texture of the pressed ceramic materials in the radial and axial direction, which consists in the graphical representation and subsequent analysis of the distribution of the electrostatic field potential differences on the surface of the dielectric sample with the diameter d and the thickness h located between the electrodes. In occasion of observing radial texture the electrodes have the cylindrical configuration and in occasion of observing the axial texture in the sample the electrodes have the axial configuration. The theoretical relationship in the paper is derived for the calculation of the voltage values measured at any position between the center electrode and the peripheral electrode, at a constant voltage U applied to the outer and inner electrodes of the dielectric sample of thickness h of the raw ceramic sample material (radial texture). Measurements have demonstrated the suitability of identifying the technological texture by measuring the potential differences on the sample surface which is located between the electrodes in the relation to the technology preparation and to the quality of the fired ceramic production.