Search citation statements
Paper Sections
Citation Types
Year Published
Publication Types
Relationship
Authors
Journals
Engine tests under flight conditions are extremely important at the stage of its complex debugging. These conditions include the simulation of icing, check for the penetration of birds in the inlet vanes, modeling hail and rain. Simulation of rain due to its significant unsteadiness need providing requirements for the concentration of water in the air, the distribution spectrum of droplets by size, the value of the average diameter of the droplets, the mass flow rate curves for the injectors and the conditions of interaction of droplets with air. This paper contains information about the developed method of calculating the characteristics of the injector for the necessary modes of water injection into the engine as well as experimental study of the injector and conducted studies of the parameters of its operation process, including the choice of optimal modes. As a result of the research, an injector was developed that allows to obtain the average median diameter of 2.66 mm and droplets of the certification spectrum. Also there was worked out the schematic diagram of the collector module of the installation for rain simulation that meets the certification requirements: simulation of rain in the “idle power” and “take-off” modes with the condition of simultaneous provision of water concentration in the air of 20 g/m3 and the average median diameter of 2.66 mm. This installation provides operation in transient modes with the condition of maintaining the water concentration in the air of 20 g/m3.
Engine tests under flight conditions are extremely important at the stage of its complex debugging. These conditions include the simulation of icing, check for the penetration of birds in the inlet vanes, modeling hail and rain. Simulation of rain due to its significant unsteadiness need providing requirements for the concentration of water in the air, the distribution spectrum of droplets by size, the value of the average diameter of the droplets, the mass flow rate curves for the injectors and the conditions of interaction of droplets with air. This paper contains information about the developed method of calculating the characteristics of the injector for the necessary modes of water injection into the engine as well as experimental study of the injector and conducted studies of the parameters of its operation process, including the choice of optimal modes. As a result of the research, an injector was developed that allows to obtain the average median diameter of 2.66 mm and droplets of the certification spectrum. Also there was worked out the schematic diagram of the collector module of the installation for rain simulation that meets the certification requirements: simulation of rain in the “idle power” and “take-off” modes with the condition of simultaneous provision of water concentration in the air of 20 g/m3 and the average median diameter of 2.66 mm. This installation provides operation in transient modes with the condition of maintaining the water concentration in the air of 20 g/m3.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2025 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.