X-shooter is the first 2nd generation instrument of the ESO Very Large Telescope (VLT). It is a very efficient, single-target, intermediate-resolution spectrograph that was installed at the Cassegrain focus of UT2 in 2009. The instrument covers, in a single exposure, the spectral range from 300 to 2500 nm. It is designed to maximize the sensitivity in this spectral range through dichroic splitting in three arms with optimized optics, coatings, dispersive elements and detectors. It operates at intermediate spectral resolution (R ∼ 4000−17 000, depending on wavelength and slit width) with fixed échelle spectral format (prism cross-dispersers) in the three arms. It includes a 1.8 × 4 integral field unit as an alternative to the 11 long slits. A dedicated data reduction package delivers fully calibrated two-dimensional and extracted spectra over the full wavelength range. We describe the main characteristics of the instrument and present its performance as measured during commissioning, science verification and the first months of science operations.

Abstract-Maribo is a new Danish CM chondrite, which fell on January 17, 2009, at 19:08:28 CET. The fall was observed by many eye witnesses and recorded by a surveillance camera, an all sky camera, a few seismic stations, and by meteor radar observatories in Germany. A single fragment of Maribo with a dry weight of 25.8 g was found on March 4, 2009. The coarse-grained components in Maribo include chondrules, fine-grained olivine aggregates, large isolated lithic clasts, metals, and mineral fragments (often olivine), and rare Ca,Al-rich inclusions. The components are typically rimmed by fine-grained dust mantles. The matrix includes abundant dust rimmed fragments of tochilinite with a layered, fishbone-like texture, tochilinite-cronstedtite intergrowths, sulfides, metals, and carbonates often intergrown with tochilinite. The oxygen isotopic composition: (d O and the presence of unaltered components suggest that Maribo is among the least altered CM chondrites. The bulk chemistry of Maribo is typical of CM chondrites. Trapped noble gases are similar in abundance and isotopic composition to other CM chondrites, stepwise heating data indicating the presence of gas components hosted by presolar diamond and silicon carbide. The organics in Maribo include components also seen in Murchison as well as nitrogen-rich components unique to Maribo.

We report the first asteroseismic results obtained with the Hertzsprung Stellar Observations Network Group Telescope from an extensive high-precision radial-velocity observing campaign of the subgiant μ Herculis. The data set was collected during 215 nights in 2014 and 2015. We detected a total of 49 oscillation modes with l values from zeroto three, including some l=1 mixed modes. Based on the rotational splitting observed in l=1 modes, we determine a rotational period of 52 days and a stellar inclination angle of 63°. The parameters obtained through modeling of the observed oscillation frequencies agree very well with independent observations and imply a stellar mass between 1.11 and 1.15 M e and an age of -+ 7.8 0.4 0.3 Gyr. Furthermore, the high-quality data allowed us to determine the acoustic depths of the He II ionization layer and the base of the convection zone.

We report on the implemented design of a two-colour instrument based on electron-multiplying CCD (EMCCD) detectors. This instrument is currently installed at the Danish 1.54 m telescope at ESO's La Silla Observatory in Chile, and will be available at the SONG (Stellar Observations Network Group) 1m telescope node at Tenerife and at other SONG nodes as well. We present the software system for controlling the two-colour instrument and calibrating the high frame-rate imaging data delivered by the EMCCD cameras. An analysis of the performance of the Two-Colour Instrument at the Danish telescope shows an improvement in spatial resolution of up to a factor of two when doing shift-and-add compared with conventional imaging, and the possibility of doing highprecision photometry of EMCCD data in crowded fields. The Danish telescope, which was commissioned in 1979, is limited by a triangular coma at spatial resolutions below 0. 5, and better results will thus be achieved at the near diffraction-limited optical system on the SONG telescopes, where spatial resolutions close to 0. 2 have been achieved. Regular EMCCD operations have been running at the Danish telescope for several years and produced a number of scientific discoveries, including microlensing detected exoplanets, detecting previously unknown variable stars in dense globular clusters, and discovering two rings around the small asteroid-like object (10199) Chariklo.

The Mastcam-Z Camera is a stereoscopic, multispectral camera with zoom capability on NASA’s Mars-2020 Perseverance rover. The Mastcam-Z relies on a set of two deck-mounted radiometric calibration targets to validate camera performance and to provide an instantaneous estimate of local irradiance and allow conversion of image data to units of reflectance (R∗ or I/F) on a tactical timescale. Here, we describe the heritage, design, and optical characterization of these targets and discuss their use during rover operations. The Mastcam-Z primary calibration target inherits features of camera calibration targets on the Mars Exploration Rovers, Phoenix and Mars Science Laboratory missions. This target will be regularly imaged during flight to accompany multispectral observations of the martian surface. The primary target consists of a gold-plated aluminum base, eight strong hollow-cylinder Sm2Co17 alloy permanent magnets mounted in the base, eight ceramic color and grayscale patches mounted over the magnets, four concentric, ceramic grayscale rings and a central aluminum shadow post (gnomon) painted with an IR-black paint. The magnets are expected to keep the central area of each patch relatively free of Martian aeolian dust. The Mastcam-Z secondary calibration target is a simple angled aluminum shelf carrying seven vertically mounted ceramic color and grayscale chips and seven identical, but horizontally mounted ceramic chips. The secondary target is intended to augment and validate the calibration-related information derived from the primary target. The Mastcam-Z radiometric calibration targets are critically important to achieving Mastcam-Z science objectives for spectroscopy and photometric properties.