A series of experiments, examining the confinement properties of ICRF heated H-mode plasmas, has been carried out on the C-Mod tokamak. C-Mod is a compact tokamak which operates at high particle, power, and current densities at toroidal fields up to 8T. Under these conditions the plasma is essentially thermal with very little contribution to the stored energy from energetic ions (typically no more than 5%) and with Ti~Te. Most of the data were taken with the machine in a single-null "closed" divertor configuration with the plasma facing components clad in molybdenum tiles. The data include those taken both before and after the first wall surfaces were coated with boron, with emphasis on the latter. H-modes obtained from plasmas run on boronized walls typically had lower impurity content and radiated power and attained higher stored energy than those run on bare molybdenum. Confinement enhancement, the energy confinement time normalized to L-mode scaling, for discharges with boronized walls, ranged from 1.6 to 2.4. The unique operating regime of the C-Mod device provided a means for extending the 1 tests of global scaling laws to parameter ranges not previously accessible. For example, the C-Mod ELMfree data was found to be 1.1-1.6 times the ITERH93 scaling and the ELMy data almost 2.0-2.8 times the ITERH92 ELMy scaling law, suggesting that the size scaling in both scalings may be too strong. While both ELMfree and ELMy discharges were produced, the ELM characteristics were not easily compared to observations on other devices. No large, low frequency ELMs were seen despite the very high edge pressure and temperature gradients that were attained. For all of our H-mode discharges, a clear linear relationship between the edge temperature pedestal and the temperature gradient in the core plasma was observed; the discharges with the "best" transport barriers also showing the greatest improvement in core confinement.

Regimes of high-confinement mode have been studied in the Alcator C-Mod tokamak [Hutchinson et al., Phys. Plasmas 1, 1511 (1994)]. Plasmas with no edge localized modes (ELM-free) have been compared in detail to a new regime, enhanced Dα (EDA). EDA discharges have only slightly lower energy confinement than comparable ELM-free ones, but show markedly reduced impurity confinement. Thus EDA discharges do not accumulate impurities and typically have a lower fraction of radiated power. The edge gradients in EDA seem to be relaxed by a continuous process rather than an intermittent one as is the case for standard ELMy discharges and thus do not present the first wall with large periodic heat loads. This process is probably related to fluctuations seen in the plasma edge. EDA plasmas are more likely at low plasma current (q>3.7), for moderate plasma shaping, (triangularity ∼0.35–0.55), and for high neutral pressures. As observed in soft x-ray emission, the pedestal width is found to scale with the same parameters that determine the EDA/ELM-free boundary.

Enhanced confinement modes up to a toroidal field of BT=8 T have been studied with up to 3.5 MW of radiofrequency (rf) heating power in the ion cyclotron range of frequencies (ICRF) at 80 MHz. H-mode is observed when the edge temperature exceeds a threshold value. The high confinement mode (H-mode) with higher confinement enhancement factors (H) and longer duration became possible after boronization by reducing the radiated power from the main plasma. A quasi-steady state with high confinement (H=2.0), high normalized beta (βN=1.5), low radiated power fraction (Pradmain/Ploss=0.3), and low effective charge (Zeff=1.5) has been obtained in Enhanced Dα H-mode. This type of H-mode has enhanced levels of continuous Dα emission and very little or no edge localized mode (ELM) activity, and reduced core particle confinement time relative to ELM-free H-mode. The pellet enhanced performance (PEP) mode is obtained by combining core fueling with pellet injection and core heating. A highly peaked pressure profile with a central value of 8 atmospheres was observed. The steep pressure gradient drives off-axis bootstrap current, resulting in a shear reversed safety factor (q) profile. Suppression of sawteeth appears to be important in maintaining the highly peaked pressure profile. Lithium pellets were found to be more effective than deuterium pellets in raising q0.

High-resolution breast-specific scintimammography can depict small (<1-cm), mammographically occult, nonpalpable lesions in women at increased risk for breast cancer not otherwise identified at mammography or physical examination.

Alcator C-Mod [I. H. Hutchinson, et al., Phys. Plasmas 1 , 1511(1994] has operated a High-confinement-mode (H-mode) plasma together with a dissipative divertor and low core Z eff . The initially attached plasma is characterized by steady-state enhancement factor, H ITER89P [P. N. Yushmanov, et al., Nucl. Fusion 30, 1999(1990], of 1.9, central Z eff of 1.1, and a radiative fraction of ~50%. Feedback control of a nitrogen gas puff is used to increase radiative losses in both the core/edge and divertor plasmas in almost equal amounts. Simultaneously, the core plasma maintains H ITER89P of 1.6 and Z eff of 1.4 in this nearly 100% radiative state. The power and particle flux to the divertor plates have been reduced to very low levels while the core plasma is relatively unchanged by the dissipative nature of the divertor.