The first spherical hohlraum energetics experiment is accomplished on the SGIII-prototype laser facility. In the experiment, the radiation temperature is measured by using an array of flat-response x-ray detectors (FXRDs) through a laser entrance hole at four different angles. The radiation temperature and M-band fraction inside the hohlraum are determined by the shock wave technique. The experimental observations indicate that the radiation temperatures measured by the FXRDs depend on the observation angles and are related to the view field. According to the experimental results, the conversion efficiency of the vacuum spherical hohlraum is in the range from 60% to 80%. Although this conversion efficiency is less than the conversion efficiency of the near vacuum hohlraum on the National Ignition Facility, it is consistent with that of the cylindrical hohlraums used on the NOVA and the SGIII-prototype at the same energy scale.

Octahedral spherical hohlraums with a single laser ring at an injection angle of 55^{∘} are attractive concepts for laser indirect drive due to the potential for achieving the x-ray drive symmetry required for high convergence implosions. Laser-plasma instabilities, however, are a concern given the long laser propagation path in such hohlraums. Significant stimulated Raman scattering has been observed in cylindrical hohlraums with similar laser propagation paths during the ignition campaign on the National Ignition Facility (NIF). In this Rapid Communication, experiments demonstrating low levels of laser-driven plasma instability (LPI) in spherical hohlraums with a laser injection angle of 55^{∘} are reported and compared to that observed with cylindrical hohlraums with injection angles of 28.5^{∘} and 55^{∘}, similar to that of the NIF. Significant LPI is observed with the laser injection of 28.5^{∘} in the cylindrical hohlraum where the propagation path is similar to the 55^{∘} injection angle for the spherical hohlraum. The experiments are performed on the SGIII laser facility with a total 0.35-μm incident energy of 93 kJ in a 3 nsec pulse. These experiments demonstrate the role of hohlraum geometry in LPI and demonstrate the need for systematic experiments for choosing the optimal configuration for ignition studies with indirect drive inertial confinement fusion.

The octahedral spherical hohlraums have natural superiority in maintaining high radiation symmetry during the entire capsule implosion process in indirect drive inertial confinement fusion. While, in contrast to the cylindrical hohlraums, the narrow space between the laser beams and the spherical hohlraum wall is usually commented. In this Letter, we address this crucial issue and report our experimental work conducted on the SGIII-prototype laser facility which unambiguously demonstrates that a simple design of cylindrical laser entrance hole (LEH) can dramatically improve the laser propagation inside the spherical hohlraums. In addition, the laser beam deflection in the hohlraum is observed for the first time in the experiments. Our 2-dimensional simulation results also verify qualitatively the advantages of the spherical hohlraums with cylindrical LEHs. Our results imply the prospect of adopting the cylindrical LEHs in future spherical ignition hohlraum design.

An ultrathin layer of uranium nitrides (UN) has been coated on the inner surface of depleted uranium hohlraum (DUH), which has been proven by our experiment to prevent the oxidization of uranium (U) effectively. Comparative experiments between the novel depleted uranium hohlraum and pure golden (Au) hohlraum are implemented on an SGIII-prototype laser facility. Under a laser intensity of 6 × 10 14 W cm −2 , we observe that the hard x-ray (hν 1.8 > keV) fraction of the uranium hohlraum decreases by 61% and the peak intensity of the total x-ray flux (0.1 keV∼5.0 keV) increases by 5%. Radiation hydrodynamic code LARED is used to interpret the above observations. Our result for the first time indicates the advantages of the UN-coated DUH in generating a uniform x-ray source with a quasi-Planckian spectrum, which should have important applications in high energy density physics.

A recently proposed octahedral spherical hohlraum with six laser entrance holes (LEHs) is an attractive concept for an upgraded laser facility aiming at a predictable and reproducible fusion gain with a simple target design. However, with the laser energies available at present, LEH size can be a critical issue. Owing to the uncertainties in simulation results, the LEH size should be determined on the basis of experimental evidence. However, determination of LEH size of an ignition target at a small-scale laser facility poses difficulties. In this paper, we propose to use the prepulse of an ignition pulse to determine the LEH size for ignition-scale hohlraums via LEH closure behavior, and we present convincing evidence from multiple diagnostics at the SGIII facility with ignition-scale hohlraum, laser prepulse, and laser beam size. The LEH closure observed in our experiment is in agreement with data from the National Ignition Facility. The total LEH area of the octahedral hohlraum is found to be very close to that of a cylindrical hohlraum, thus successfully demonstrating the feasibility of the octahedral hohlraum in terms of laser energy, which is crucially important for sizing an ignition-scale octahedrally configured laser system. This work provides a novel way to determine the LEH size of an ignition target at a small-scale laser facility, and it can be applied to other hohlraum configurations for the indirect drive approach.