This article presents the hardware design and software algorithms of RoboSimian, a statically stable quadrupedal robot capable of both dexterous manipulation and versatile mobility in difficult terrain. The robot has generalized limbs and hands capable of mobility and manipulation, along with almost fully hemispherical 3D sensing with passive stereo cameras. The system is semi-autonomous, enabling low-bandwidth, high latency control operated from a standard laptop. Because limbs are used for mobility and manipulation, a single unified mobile manipulation planner is used to generate autonomous behaviors, including walking, sitting, climbing, grasping, and manipulating. The remote operator interface is optimized to designate, parameterize, sequence, and preview behaviors, which are then executed by the robot. RoboSimian placed fifth in the DARPA Robotics Challenge (DRC) Trials, demonstrating its ability to perform disaster recovery tasks in degraded human environments.

This paper describes a new sun sensor for absolute heading detection developed for the Field Integrated, Design and Operations (FIDO) rover. The FIDO rover is an advanced technology rover that is a terrestrial prototype of the rovers NASA/Jet Propulsion Laboratory (JPL) plans to send to Mars in 2003. Our goal was to develop a sun sensor that fills the current cost/performance gap, uses the power of subpixel interpolation, makes use of current hardware on the rover, and demands very little computational overhead. The need for a sun sensor on planetary rovers lies in the fact that current means of estimating the heading of planetary rovers involves integration of noisy rotational-speed measurements. This noise causes error to accumulate and grow rapidly. Moreover, the heading error affects the estimate of the and position of the rover. More importantly, incremental odometry heading estimation is only reliable over relatively short distances. There is an urgent need to develop a new heading-detection sensor for long traverses [for example, 100 m per Sol (Martian Day)], as requested for future Mars mission. Results of a recent FIDO field trial at Black Rock Summit in Central Nevada and several operations readiness tests at the JPL MarsYard using the sun sensor have demonstrated threefold to fourfold improvement in the heading estimation of the rover compared to incremental odometry.

No abstract

This paper discusses hardware and software improvements to the RoboSimian system leading up to and during the 2015 DARPA Robotics Challenge (DRC) Finals. Team RoboSimian achieved a 5th place finish by achieving 7 points in 47:59 min. We present an architecture that was structured to be adaptable at the lowest level and repeatable at the highest level. The low‐level adaptability was achieved by leveraging tactile measurements from force torque sensors in the wrist coupled with whole‐body motion primitives. We use the term “behaviors” to conceptualize this low‐level adaptability. Each behavior is a contact‐triggered state machine that enables execution of short‐order manipulation and mobility tasks autonomously. At a high level, we focused on a teach‐and‐repeat style of development by storing executed behaviors and navigation poses in an object/task frame for recall later. This enabled us to perform tasks with high repeatability on competition day while being robust to task differences from practice to execution.

Abstract. An architecture and conceptual design for a robotically assembled, modular space telescope (RAMST) that enables extremely large space telescopes to be conceived is presented. The distinguishing features of the RAMST architecture compared with prior concepts include the use of a modular deployable structure, a general-purpose robot, and advanced metrology, with the option of formation flying. To demonstrate the feasibility of the robotic assembly concept, we present a reference design using the RAMST architecture for a formation flying 100-m telescope that is assembled in Earth orbit and operated at the Sun-Earth Lagrange Point 2.