The harvesting of energy from ambient environments is an emerging technology with potential for numerous applications, including portable electronic devices for renewable energy. Most of the current research activities refer to classical piezoelectric ceramic materials, but more recently the development of electrostrictive polymers has generated novel opportunities for high-strain actuators. At present, the investigation of using electrostrictive polymers for energy harvesting (a conversion of mechanical to electrical energy) is beginning to show potential for this application. This paper discusses the development of a model that is able to predict the energy harvesting capabilities of an electrostrictive polymer composite (EPC). An equivalent electrical scheme has been developed by using the model of current that was recently developed by our group. After the validation of the model on a macroscopic level, an empirical relationship was established to predict the value of power from the electrostriction coefficient, the dielectric permittivity, and the compliance of the material. Finally, results indicated that the dielectric permittivity was the crucial parameter for energy harvesting.

No abstract

Harvesting systems capable of transforming unused environmental energy into useful electrical energy have been extensively studied for the last two decades. The recent development of electrostrictive polymers has generated new opportunities for harvesting energy. The contribution of this study lies in the design and validation of electrostrictive polymer- based harvesters able to deliver dc output voltage to the load terminal, making the practical application of such material for self-powered devices much more realistic. Theoretical analysis supported by experimental investigations showed that an energy harvesting module with ac-to-dc conversion allows scavenging power up to 7 μW using a bias electric field of 10 V/μm and a transverse strain of 0.2%. This represents a power density of 280 μW/cm(3) at 100 Hz, which is much higher than the corresponding values of most piezo-based harvesters.