We provide an overview of the design and capabilities of the near-infrared spectrograph (NIRSpec) onboard the James Webb Space Telescope. NIRSpec is designed to be capable of carrying out low-resolution (R = 30− 330) prism spectroscopy over the wavelength range 0.6 − 5.3µm and higher resolution (R = 500− 1340 or R = 1320− 3600) grating spectroscopy over 0.7 − 5.2µm, both in singleobject mode employing any one of five fixed slits, or a 3.1×3.2 arcsec 2 integral field unit, or in multiobject mode employing a novel programmable micro-shutter device covering a 3.6×3.4 arcmin 2 field of view. The all-reflective optical chain of NIRSpec and the performance of its different components are described, and some of the trade-offs made in designing the instrument are touched upon. The faint-end spectrophotometric sensitivity expected of NIRSpec, as well as its dependency on the energetic particle environment that its two detector arrays are likely to be subjected to in orbit are also discussed.

This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries for which it was built. Moreover, almost across the board, the science performance of JWST is better than expected; in most cases, JWST will go deeper faster than expected. The telescope and instrument suite have demonstrated the sensitivity, stability, image quality, and spectral range that are necessary to transform our understanding of the cosmos through observations spanning from near-earth asteroids to the most distant galaxies.

Micro Electromechanical System (MEMS) microshutter arrays are being developed at NASA Goddard Space Flight Center for use as a field selector of the Near Infrared Spectrograph (NIRSpec) on the James Webb Space Telescope (JWST). The microshutter arrays are designed for the spontaneous selection of a large number of objects in the sky and the transmission of light to the NIRSpec detector with high contrast. The JWST environment requires cryogenic operation at 35K. Microshutter arrays are fabricated out of silicon-on-insulator (SOI) silicon wafers. Arrays are closepacked silicon nitride membranes with a pixel size of 100x200 m. Individual shutters are patterned with a torsion flexure permitting shutters to open 90 degrees with a minimized mechanical stress concentration. Light shields are processed for blocking light from gaps between shutters and frames. The mechanical shutter arrays are fabricated using MEMS technologies. The processing includes multi-layer metal depositions, the patterning of magnetic stripes and shutter electrodes, a reactive ion etching (RIE) to form shutters out of the nitride membrane, an anisotropic back-etch for wafer thinning, followed by a deep RIE (DRIE) back-etch to form mechanical supporting grids and release shutters from the silicon substrate. An additional metal deposition is used to form back electrodes. Shutters are actuated by a magnetic force and latched using an electrostatic force. Optical tests, addressing tests, and life tests are conducted to evaluate the performance and the reliability of microshutter arrays.

No abstract