SHARK is a proposal aimed at investigating the technical feasibility and the scientific capabilities of high-contrast cameras to be implemented at the Large Binocular Telescope (LBT). SHARK foresees two separated channels: near-infrared (NIR) channel and visible, both providing imaging and coronagraphic modes. We describe here the SHARK instrument concept, with particular emphasis on the NIR channel at the level of a conceptual study, performed in the framework of the call for proposals for new LBT instruments. The search for giant extra-Solar planets is the main science case, as we will outline in the paper.

No abstract

JANUS (Jovis, Amorum ac Natorum Undique Scrutator) is the visible camera selected for the ESA JUICE mission to the Jupiter system. Resources constraints, S/C characteristics, mission design, environment and the great variability of observing conditions for several targets put stringent constraints on instrument architecture. In addition to the usual requirements for a planetary mission, the problem of mass and power consumption is particularly stringent due to the long-lasting cruising and operations at large distance from the Sun.JANUS design shall cope with a wide range of targets, from Jupiter atmosphere, to solid satellite surfaces, exosphere, rings, and lightning, all to be observed in several color and narrow-band filters. All targets shall be tracked during the mission and in some specific cases the DTM will be derived from stereo imaging. Mission design allows a quite long time range for observations in Jupiter system, with orbits around Jupiter and multiple fly-bys of satellites for 2.5 years, followed by about 6 months in orbit around Ganymede, at surface distances variable from 10 4 to few hundreds km.Our concept was based on a single optical channel, which was fine-tuned to cover all scientific objectives based on low to high-resolution imaging. A catoptric telescope with excellent optical quality is coupled with a rectangular detector, avoiding any scanning mechanism.In this paper the present JANUS design and its foreseen scientific capabilities are discussed.

Spreading the PSF over a quite large amount of pixels is an increasingly used observing technique in order to reach extremely precise photometry, such as in the case of exoplanets searching and characterization via transits observations. A PSF top-hat profile helps to minimize the errors contribution due to the uncertainty on the knowledge of the detector flat field. This work has been carried out during the recent design study in the framework of the ESA small mission CHEOPS. Because of lack of perfect flat-fielding information, in the CHEOPS optics it is required to spread the light of a source into a well defined angular area, in a manner as uniform as possible. Furthermore this should be accomplished still retaining the features of a true focal plane onto the detector. In this way, for instance, the angular displacement on the focal plane is fully retained and in case of several stars in a field these look as separated as their distance is larger than the spreading size. An obvious way is to apply a defocus, while the presence of an intermediate pupil plane in the Back End Optics makes attractive to introduce here an optical device that is able to spread the light in a well defined manner, still retaining the direction of the chief ray hitting it. This can be accomplished through an holographic diffuser or through a lenslet array. Both techniques implement the concept of segmenting the pupil into several sub-zones where light is spread to a well defined angle. We present experimental results on how to deliver such PSF profile by mean of holographic diffuser and lenslet array. Both the devices are located in an intermediate pupil plane of a properly scaled laboratory setup mimicking the CHEOPS optical design configuration.