Electrochemical energy storage is one of the main societal challenges of this century. The performances of classical lithium-ion technology based on liquid electrolytes have made great advances in the past two decades, but the intrinsic instability of liquid electrolytes results in safety issues. Solid polymer electrolytes would be a perfect solution to those safety issues, miniaturization and enhancement of energy density. However, as in liquids, the fraction of charge carried by lithium ions is small (<20%), limiting the power performances. Solid polymer electrolytes operate at 80 °C, resulting in poor mechanical properties and a limited electrochemical stability window. Here we describe a multifunctional single-ion polymer electrolyte based on polyanionic block copolymers comprising polystyrene segments. It overcomes most of the above limitations, with a lithium-ion transport number close to unity, excellent mechanical properties and an electrochemical stability window spanning 5 V versus Li(+)/Li. A prototype battery using this polyelectrolyte outperforms a conventional battery based on a polymer electrolyte.

No abstract

The development of nanoscale masking for particle deposition is exceedingly important to push the future of nanoelectronics beyond the current limits of lithography. We present the first example of ordered hexagonal covalent nanoporous structures deposited in extended arrays of near monolayer coverage across a Ag(111) surface. The networks were formed from the deposition of the reagents from a heated molybdenum crucible between 370 and 460 K under ultrahigh vacuum (UHV) onto a cleaned Ag(111) substrate and imaged using a scanning tunneling microscope (STM). Two surface covalent organic frameworks (SCOFs) are presented; the first is formed from the deposition of 1,4-benzenediboronic acid (BDBA) and its dehydration to form the boroxine-linked SCOF-1, the second is formed from the co-deposition of BDBA and 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) to form a dioxaborole-linked SCOF-2 network. The networks were found to produce nanoporous structures of 15 A for SCOF-1 and 29 A for SCOF-2, which agreed with theoretical pore sizes determined from DFT calculations. Both SCOFs were found to have exceptional thermal stability, maintaining their structure until approximately 750 K, which was found to be the polymer degradation temperature from thermal gravimetric analysis (TGA).