Self-sweeping of laser wavelength corresponding to holmium emission near 2100 nm is reported. The sweeping occurred in ~4 nm interval with rate ~0.7 nm/s from longer towards shorter wavelengths. Origins of the selection of the sweeping direction are discussed. The laser wavelength drift with time was registered by Fourier transform infrared spectrometer. To our knowledge it is the first observation of self-swept fiber laser beyond 2000 nm.

We present a method for the estimation of the reflection spectra of transient gratings in rare-earth doped fiber lasers having a self-sweeping of laser wavelength. We show that high reflectivities of several tens of percent can be achieved. An example of this is demonstrated through the use of an experimental Yb-doped Fabry-Perot fiber laser. The gratings' spectra are highly asymmetric due to the apodization of the refractive index modulation. The importance of the self-sweeping regime for triggering self-Q-switched laser instabilities is discussed.

Multi-beam micro- and nano-machining of material surfaces has been getting more important because of its great potential to increase production speed of large size laser induced periodic surface structures (LIPSS). Fast and cheap production of engineered surfaces structures can bring unique properties of surfaces like tailored wettability, friction, antibacterial properties, etc., to mass-production with consequence in, for example, energy and costs savings. However, tailoring of long-term stable interference patterns from ultrashort laser pulses requires an extremely stable laser system with nearly diffraction-limited output beams. HiLASE Centre developed such a thin-disk-based Yb:YAG sub-picosecond laser platform, PERLA, providing average output power up to 0.5 kW with 2nd and 4th harmonic generation extensions and demonstrated its potential for direct laser interference patterning (DLIP). In this paper, we focus on details of the thin-disk PERLA laser.

We demonstrated two methods of increasing the bandwidth of a broadband light source based on amplified spontaneous emission in thulium-doped fibres. Firstly, we have shown by means of a comprehensive numerical model that the full-width at half maximum of the thulium-doped fibre based broadband source can be more than doubled by using specially tailored spectral filter placed in front of the mirror in a double-pass configuration of the amplified spontaneous emission source. The broadening can be achieved with only a small expense of the output power. Secondly, we report results of the experimental thulium-doped fibre broadband source, including fibre characteristics and performance of the thulium-doped fibre in a ring laser setup. The spectrum broadening was achieved by balancing the backward amplified spontaneous emission with back-reflected forward emission.

Results of the first experimental demonstration of the recently proposed technique for improvement of the pump absorption in double-clad fibers by their simultaneous coiling and twisting are reported. The peak absorption (14 dB) of 3-m long hexagonal thulium-doped fiber was increased by 8 dB by its simultaneous coiling and twisting. Explanation of the effect is given by numerical modelling of the pump absorption in hexagonal and panda-type double-clad fibers. Improvement of fiber laser performance was also proved. The slope efficiency increased from 19.6% of the straight fiber to 23.9% of the coiled only fiber and 29.4% of the simultaneously coiled and twisted fiber.