No abstract

No abstract

Z-pinch dynamic hohlraums (ZPDHs) could potentially be used to drive inertial confinement fusion targets. Double- or multishell capsules using the technique of volume ignition could exploit the advantages of ZPDHs while tolerating their radiation asymmetry, which would be unacceptable for a central ignition target. In this paper, we review research on Z-pinch implosions and ZPDHs for indirect drive targets at the Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics. The characteristics of double-shell targets and the associated technical requirements are analyzed through a one-dimensional computer code developed from MULTI-IFE. Some key issues regarding the establishment of suitable sources for dynamic hohlraums are introduced, such as soft X-ray power optimization, novel methods for plasma profile modulation, and the use of thin-shell liner implosions to inhibit the generation of prior-stagnated plasma. Finally, shock propagation and radiation characteristics in a ZPDH are presented and discussed, together with some plans for future work.

The fundamental role of solubility and supersaturation of solute for crystal growth from solution has been widely realized. In order to optimize the process of CuI crystal growth by CuI·HI decomplexation in HI acid, the solubility and supersaturation curves of CuI in HI-H 2 O mixed solvent were measured, and then a modified concentration programming scheme was designed, which could grow high quality CuI single crystals of 2.5 mm on edge successfully. In this scheme, the concentration distribution of CuI·HI complex and HI acid in silica gel along their diffused direction were measured with spectrophotometer, and the evolution of CuI·HI complex supersaturation ratio was analysed. It was found that the excess CuI·HI complex concentration would lead to the high supersaturation ratio and the formation CuI dendrites. The condition for regular CuI single crystal growth in silica gel was measured as follow: when the crystal nuclei appears, the CuI·HI complex concentration in HI-H 2 O solvent should be kept in the range of 0.033-0.050 mol/L and its corresponding supersaturation ratio is 1.24-1.45, and then they should be respectively declined to a range of 0.025-0.033 mol/L and 1.14-1.26 at the stage of crystal growth. The results may provide a useful clue for further improvement of the experimental scheme.

First experimental investigations of foil aluminium liner implosions with a high aspect ratio of ∼ 103 at an 8 MA pulsed-power facility in China, motivated by possible application for magneto-inertial fusion, will be reported. Key diagnostics including UV cameras, micro-magnetic probes and x-ray pinhole imaging systems were fielded. Quasi-monochromatic UV images and optical streak data showed localized plasma formation at breakdown positions, suggesting that vacuum gaps in contact play a crucial role in long-time and non-uniform initiation. In liner ablation, quasi-periodic striation patterns were directly observed in UV self-emission images and were found to be azimuthally correlated with Rayleigh–Taylor instabilities. An m ≠ 0 azimuthal helical mode was obtained for the unmagnetized liner, which could be attributed to the large surface roughness that may act as an inherently and randomly seeded instability. Precursor plasma formation was confirmed by the observed x-ray emission on-axis at −70 ns by the end-on x-ray framing camera. Further quantitative current measurements taken by micro magnetic probes suggested that the current division due to precursor plasma was approximately 20% of the load current at −66 ns. Side-on imaging diagnostics indicated an evident liner implosion, however with a relatively low convergence ratio of ∼ 3.2 at stagnation. For the observed emission rings with much faster velocity in end-on x-ray images, possible mechanisms were discussed.