The effects of amplitude and time of ultrasound-assisted extraction on the physicochemical properties and the fatty acid profile of pumpkin seed oil (Cucurbita pepo) were evaluated. Ultrasound time (5-30 min) and the response variables amplitude (25-100%), extraction yield, efficiency, oxidative stability in terms of the free fatty acids (FFA) of the plant design comprising two independent experiments variables, peroxide (PV), p-anisidine (AV), totox value (TV) and the fatty acid profile were evaluated. The results were analyzed by multiple linear regression. The time and amplitude showed significant differences (P<0.05) for all variables. The highest yield of extraction was achieved at 5 min and amplitude of 62.5% (62%). However, the optimal ultrasound-assisted extraction conditions were as follows: ultrasound time of 26.34 min and amplitude of 89.02%. All extracts showed low FFA (2.75-4.93% oleic acid), PV (1.67-4.68 meq/kg), AV (1.94-3.69) and TV (6.25-12.55) values. The main fatty acids in all the extracts were oleic and linoleic acid. Therefore, ultrasound-assisted oil extraction had increased performance and reduced extraction time without affecting the oil quality.

Summary The aim of this research was to prepare an extruded snack based on nixtamalized maize flour (Zea mays L.) (NMF) enriched with grasshopper meal (Sphenarium purpurascens Ch.) (GM) using a single screw extruder with a compression screw ratio of 3:1. A central experimental design comprising three independent variables, namely, extrusion temperature (T = 120–180 °C), feed moisture content (FMC = 18–22 g/100 g) and the grasshopper meal proportion (GMP = 0–40 g/100 g), was used. Increasing T decreased (P < 0.05) the expansion index (EI), bulk density (BD) and hardness (H). Increasing the FMC increased (P < 0.05) the EI. Increasing the GMP decreased (P < 0.05) the EI, H and water absorption index (WAI) and increased (P < 0.05) the BD and total colour difference (ΔE). The treatments that resulted in better general acceptability were those that contained a lower GMP. An extruded snack acceptable to the consumer can be obtained from a blend of NMF and GM, and up to 8.11 g/100 g of GM can be incorporated without affecting the physicochemical properties and acceptance of the snack.

The aim of this research was to compare the performance and sensory profiling of a panel of artisanal cheese producers against a trained panel and their relationship to consumer liking (external preference mapping). Performance was analyzed statistically at an individual level using the Fisher's test (F) for discrimination, the mean square error for repeatability, and Manhattan plots for visualizing the intra-panel homogeneity. At group level, performance was evaluated using ANOVA. External preference mapping technique was applied to determine the efficiency of each sensory profile. Results showed that the producers panel was discriminant and repetitive with a performance similar to that of the trained panel. Manhattan plots showed that the performance of artisanal cheese producers was more homogeneous than trained panelists. The correlation between sensory profiles (Rv = 0.95) demonstrated similarities in the generation and use of sensory profiles. The external preference maps generated individually with the profiles of each panel were also similar. Recruiting individuals familiar with the production of artisanal cheeses as panelists is a viable strategy for sensory characterization of artisanal cheeses within their context of origin because their results were similar to those from the trained panel and can be correlated with consumer liking data.

No abstract