We have developed ultra-flat carbon film electrodes with a wide potential window and a low capacitive current by the electron cyclotron resonance (ECR) sputtering method. The film consists of sp2 and sp3 bonds (sp3/sp2 ratio = 0.702) and is sufficiently conductive for electrochemical measurements without doping. The film has average roughness of 0.7 A, which is much flatter than that of nanocrystalline diamond film. The potential limit of ECR sputtered carbon (current limit < +/-500 muA/cm2) in the positive direction is 2.0 V vs Ag/AgCl, which is slightly lower than that of boron-doped diamond (2.1 V) and much wider than that of a glassy carbon (GC) electrode (1.7 V). In contrast, a much wider potential window can be obtained in the negative direction. The capacitive current is also much lower than that of a GC electrode due to the ultra-flat surface and the low number of oxygen-containing groups at the film surface. ECR sputtered carbon film can be used to measure each base of oligonucleotides by electrochemical oxidation without any pretreatment. The ultra-flat surface and low surface oxygen concentration suppress fouling with electroactive species, such as oligonucleotides, NADH, and bisphenol A.

This paper describes the characterization, electrochemical properties, and applications of carbon films prepared by the electron cyclotron resonance (ECR) sputtering method. The ECR-sputtered carbon film was deposited within several minutes at room temperature. The optimized sputtering conditions significantly change the film structure, which includes many more sp3 bonds (sp3/sp2 = 0.702) than previously reported film (sp3/sp2 = 0.274)1 with an extremely flat surface (0.7 A). The ECR-sputtered carbon films exhibit excellent electrochemical properties. For example, they have nearly the same potential window in the positive direction as that of high-quality, boron-doped diamond (moderately doped, 10(19)-10(20) boron atoms/cm3)2 and an even wider potential window in the negative direction with a low background current, high stability, and suppression of fouling by electroactive species without pretreatment. The electron-transfer rates at ECR-sputtered carbon films are similar to those of glassy carbon (GC) for Ru(NH3)(6)(2+)/(3+) and Fe(CN)(6)(3-)/(4-), whereas they are much slower than those of GC for Fe2+/3+, dopamine oxidation, and O2 reduction due to weak interactions between electroactive species and the ECR-sputtered carbon film surface. Such a response can be attributed to the ultraflat surface and low surface O/C ratios of ECR-sputtered carbon films. ECR-sputtered carbon film is advantageous for measuring biochemicals with high oxidation potentials because of its wide potential window and high stability. Highly reproducible and well-defined cyclic voltammograms were obtained for histamine and azide ions with a peak potential at 1.25 and 1.12 V vs Ag/AgCl, respectively. The film is very stable for continuous voltammetry measurements in 10 microM bisphenol A, which usually fouls the electrode surface with oxidation products.

Organic light-emitting transistors (OLETs) are of great research interest because they combine the advantage of the active channel of a transistor that can control the luminescence of an in-situ light-emitting diode in the same device. Here we report a novel single-crystal OLET (SCLET) that is coupled with single crystal optical feedback resonators. The combination of single-crystal waveguides with native Fabry-Perot cavities, formed by parallel crystal edges, drastically lowers the threshold energy for spectral narrowing and non-linear intensity enhancement. We apply this structure to SCLETs and demonstrate the first fabrication of a SCLET with the optical feedback resonators.