Hydraulic models of circulation are used to test mechanical heart assist devices and for research and training purposes. However, when compared with numerical models, they are rather expensive and often not sufficiently flexible or accurate. Flexibility and accuracy can be improved by merging numerical models with physical models, thus obtaining a hybrid model where numerical and physical sections are connected by an electrohydraulic interface. This concept is applied here to represent left ventricular function. The resulting hybrid model is inserted into the existing closed loop model of circulation. The hybrid model reproduces ventricular function by a variable elastance numerical model. Its interaction with the hydraulic sections is governed by measuring left atrial and systemic arterial pressures and computing the left ventricular output flow by the resolution of the corresponding equations. This signal is used to control a flow generator reproduced by a gear pump driven by a DC motor. Results obtained under different circulatory conditions demonstrate the behavior of the ventricular model on the pressure-volume plane and report the trend of the main hemodynamic variables.

Mock circulatory systems are used to test mechanical assist devices and for training and research purposes; when compared to numerical models, however, they are not flexible enough and rather expensive. The concept of merging numerical and physical models, resulting in a hybrid one, is applied here to represent the input impedance of the systemic arterial tree, by a conventional windkessel model built out of an electro-hydraulic (E-H) impedance simulator added to a hydraulic section. This model is inserted into an open loop circuit, completed by another hybrid model representing the ventricular function. The E-H impedance simulator is essentially an electrically controlled flow source (a gear pump). Referring to the windkessel model, it is used to simulate the peripheral resistance and the hydraulic compliance, creating the desired input impedance. The data reported describe the characterisation of the E-H impedance simulator and demonstrate its behaviour when it is connected to a hybrid ventricular model. Experiments were performed under different hemodynamic conditions, including the presence of a left ventricular assist device (LVAD).

Computer simulation of a cardiovascular system enabled us to predict the effects of simultaneous application of mechanical ventilation (MV) and intraaortic ballon pumping (IABP) on ventricular energetics. External work (EW), pressure-volume area (PVA), potential energy (PE) and cardiac mechanical efficiency (CME) were calculated. Nummerical simulation showed that changes of positive intrathoracic pressure have a considerable effect on left and right ventricular EW, PE, PVA and CME, whether IABP is used or not. The right ventricular energetics was much less influenced by systemic resistance (Ras) changes than the left ventricular one. Simultaneous application of IABP and MV showed a remarkable effect on left ventricular EW. The net result was reversed sensitivity to pulmonary resistance (Rap) and reduced sensitivity to Ras. PVA was generally reduced, while CME is increased by simultaneous presence of IABP and MV. The sensitivity of CME to Rap and Ras variation was diminished in this situation.

Hydraulic models of the circulation are used to test mechanical devices and for training and research purposes; when compared to numerical models, however, they are not flexible enough and rather expensive. The solution proposed here is to merge the characteristics and the flexibility of numerical models with the functions of physical models. The result is a hybrid model with numerical and physical sections connected by an electro-hydraulic interface - which is to some extent the main problem since the numerical model can be easily changed or modified. The concept of hybrid model is applied to the representation of ventricular function by a variable elastance numerical model. This prototype is an open loop circuit and the physical section is built out of a reservoir (atrium) and a modified windkessel (arterial tree). The corresponding equations are solved numerically using the variables (atrial and arterial pressures) coming from the physical circuit. Ventricular output flow is the computed variable and is sent to a servo amplifier connected to a DC motor-gear pump system. The gear pump, behaving roughly as a flow source, is the interface to the physical circuit. Results obtained under different hemodynamic conditions demonstrate the behaviour of the ventricular model on the pressure-volume plane and the time course of output flow and arterial pressure.

Physical models of the circulation are used for research, training and for testing of implantable active and passive circulatory prosthetic and assistance devices. However, in comparison with numerical models, they are rigid and expensive. To overcome these limitations, we have developed a model of the circulation based on the merging of a lumped parameter physical model into a numerical one (producing therefore a hybrid). The physical model is limited to the barest essentials and, in this application, developed to test the principle, it is a windkessel representing the systemic arterial tree. The lumped parameters numerical model was developed in LabVIEW™ environment and represents pulmonary and systemic circulation (except the systemic arterial tree). Based on the equivalence between hydraulic and electrical circuits, this prototype was developed connecting the numerical model to an electrical circuit - the physical model. This specific solution is valid mainly educationally but permits the development of software and the verification of preliminary results without using cumbersome hydraulic circuits. The interfaces between numerical and electrical circuits are set up by a voltage controlled current generator and a voltage controlled voltage generator. The behavior of the model is analyzed based on the ventricular pressure-volume loops and on the time course of arterial and ventricular pressures and flow in different circulatory conditions. The model can represent hemodynamic relationships in different ventricular and circulatory conditions.