No abstract

The world's largest pulsed superconducting coil was successfully tested by charging up to 13 T and 46 kA with a stored energy of 640 MJ. The ITER central solenoid (CS) model coil and CS insert coil were developed and fabricated through an international collaboration, and their cooldown and charging tests were successfully carried out by international test and operation teams. In pulsed charging tests, where the original goal was 0.4 T/s up to 13 T, the CS model coil and the CS insert coil achieved ramp rates to 13 T of 0.6 T/s and 1.2 T/s, respectively. In addition, the CS insert coil was charged and discharged 10 003 times in the 13 T background field of the CS model coil and no degradation of the operational temperature margin directly coming from this cyclic operation was observed. These test results fulfilled all the goals of CS model coil development by confirming the validity of the engineering design and demonstrating that the ITER coils can now be constructed with confidence.

No abstract

This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the University of California nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or the University of California, and shall not be used for advertising or product endorsement purposes. This is a preprint of a paper intended for publication in a journal or proceedings. Since changes may be made before publication, this preprint is made available with the understanding that it will not be cited or reproduced without the permission of the author. This report has been reproduced directly from the best available copy.

The Central Solenoid Model Coil (CSMC) was designed and built by an ITER collaboration in 1993-2001. Three heavily instrumented Inserts have been also built for testing in the background field of the CSMC. The Nb 3 Al Insert was designed and built by Japan to explore the feasibility of an alternative to Nb 3 Sn superconductor for fusion magnets. The Nb 3 Al Insert coil was tested in the CSMC Test Facility at the Japan Atomic Energy Research Institute, Naka, Japan in March-May 2002. It was the third Insert tested in this facility under this program. The Nb 3 Al Insert coil was charged successfully without training in the background field of the CSMC to the design current of 46 kA at 13 T peak field and later was successfully charged up to 60 kA in 12.5 T field. This paper presents the test results overview.