No abstract

No abstract

Nanocrystalline metals demonstrate a range of fascinating properties, including high levels of mechanical strength. However, as these materials are exposed to high temperatures, it is critical to determine the grain size evolution, as this process can drastically change the mechanical properties. In this work, nanocrystalline sputtered Cu thin films with 43 +/- 2 nm grain size were produced by dc-magnetron sputtering. Specimens were subsequently annealed in situ in a transmission electron microscope at 100, 300 and 500 degrees C. Not only was grain growth more evident at 500 degrees C but also the fraction of twins found. An analysis of grain growth kinetics revealed a time exponent of 3 and activation energy of 35 kJ mol(-1). This value is explained by the high energy stored in the form of dislocation, grain boundaries and twin boundaries existing in nanocrystalline copper, as well as the high probability for atoms to move across grains in nanocrystalline materials.

No abstract

The main challenge in the production of metal matrix composites reinforced by carbon nanotubes (CNTs) is the development of a manufacturing process ensuring the dispersion of nanoparticles without damaging them, and the formation of a strong bond with the metallic matrix to achieve an effective load transfer, so that the maximum reinforcement effect of CNTs will be accomplished. This research focuses on the production by powder metallurgy of aluminum and nickel matrix composites reinforced by CNTs, using ultrasonication as the dispersion and mixture process. Microstructural characterization of nanocomposites was performed by optical microscopy (OM), scanning and transmission electron microscopy (SEM and TEM), electron backscattered diffraction (EBSD) and high-resolution transmission electron microscopy (HRTEM). Microstructural characterization revealed that the use of ultrasonication as the dispersion and mixture process in the production of Al/CNT and Ni/CNT nanocomposites promoted the dispersion and embedding of individual CNT in the metallic matrices. CNT clusters at grain boundary junctions were also observed. The strengthening effect of the CNTs is shown by the increase in hardness for all nanocomposites. The highest hardness values were observed for Al/CNT and Ni/CNT nanocomposites, with a 1.00 vol % CNTs.