Precise research on the RbF–Al2O3 system was carried out by means of combining X-ray powder diffraction, high-field solid-state NMR spectroscopy, and thermal analysis methods. α-Rb3AlF6, RbAlO2, Rb2Al22O34, and new phase, Rb2Al2O3F2, were identified in the system. The structure of this new rubidium oxofluoroaluminate was determined. It is built up from single layers of oxygen-connected AlO3F tetrahedra, those layers beeing separated by fluorine atoms. This type of structure exhibits a decent ionic conductivity at ambient temperature, 1.74 × 10–6 S cm–1. The similar structural arrangement of O3Al–O–AlO3 and FO2Al–O–AlO2F tetrahedra of the conduction planes in Rb2Al22O34 and Rb2Al2O3F2 were confirmed by 27Al NMR measurements. A thermal analysis of the RbF–Al2O3 system revealed that it can be defined as a pseudobinary subsystem of the more general quaternary RbF–AlF3–Al2O3–Rb2O phase diagram. From a phase analysis of individual phase fields, the mutual metastable behavior of all founded phases can be considered. It was observed that fluoro- and oxoaluminates exist together. Rb2Al2O3F2 is more stable under high temperature. Rubidium fluoro- and oxoaluminates are metastable precursors of the thermodynamically more stable structure of rubidium oxofluoroaluminate.

Precise investigation of part of the phase diagram of KF-AlO system was performed in an experiment combining different techniques. Solidified mixtures of KF-AlO were studied by X-ray powder diffraction and high-field solid-state NMR spectroscopy over a wide range of compositions. To help with the interpretation of the NMR spectra of the solidified samples found as complex admixtures, we synthesized the following pure compounds: KAlO, KAlO, α-KAlF, KAlF, and KAlOF. These compounds were then characterized using various solid-state NMR techniques, including MQ-MAS and D-HMQC. NMR parameters of the pure compounds were finally determined using first-principles density functional theory calculations. The phase diagram of KF-AlO with the alumina content up to 30 mol % was determined by means of thermal analysis. Thermal analysis was also used for the description of the thermal stability of one synthesized compound, KAlOF.