Abstract:We present an ultrafast thin disk laser that generates an average output power of 275 W, which is higher than any other modelocked laser oscillator. It is based on the gain material Yb:YAG and operates at a pulse duration of 583 fs and a repetition rate of 16.3 MHz resulting in a pulse energy of 16.9 μJ and a peak power of 25.6 MW. A SESAM designed for high damage threshold initiated and stabilized soliton modelocking. We reduced the nonlinearity of the atmosphere inside the cavity by several orders of magnitude by operating the oscillator in a vacuum environment. Thus soliton modelocking was achieved at moderate amounts of self-phase modulation and negative group delay dispersion. Our approach opens a new avenue for power scaling femtosecond oscillators to the kW level. 435-453 (1996). 19201-19208 (2010). Huber, and U. Keller, "High-power ultrafast thin disk laser oscillators and their potential for sub-100-femtosecond pulse generation," Appl. Published in OpticsExpress 20, issue 21, 23535-23541, 2012 which should be used for any reference to this

This paper presents the use of a novel fabrication technique to produce three-dimensional (3D) nanostructures. The process is based on conventional microfabrication techniques to create a planar pattern in an InGaAs/GaAs bilayer that self-assembles into 3D structures during a wet etch release. The nanostructures are proposed to function as nanosprings for electromechanical sensors. Nanomanipulation inside a scanning electron microscope (SEM) was conducted to probe the structures for mechanical characterization. The results were validated by simulation.

We present a semiconductor saturable absorber mirror (SESAM) mode-locked thin-disk laser generating 80 μJ of pulse energy without additional amplification. This laser oscillator operates at a repetition rate of 3.03 MHz and delivers up to 242 W of average output power with a pulse duration of 1.07 ps, resulting in an output peak power of 66 MW. In order to minimize the parasitic nonlinearity of the air inside the laser cavity, the oscillator was operated in a vacuum environment. To start and stabilize soliton mode locking, we used an optimized high-damage threshold, low-loss SESAM. With this new milestone result, we have successfully scaled the pulse energy of ultrafast laser oscillators to a new performance regime and can predict that pulse energies of several hundreds of microjoules will become possible in the near future. Such lasers are interesting for both industrial and scientific applications, for example for precise micromachining and attosecond science.

We present a semiconductor saturable absorber mirror mode-locked thin disk laser based on Yb:Lu(2)O(3) with an average power of 141 W and an optical-to-optical efficiency of more than 40%. The ideal soliton pulses have an FWHM duration of 738 fs, an energy of 2.4 microJ, and a corresponding peak power of 2.8 MW. The repetition rate was 60 MHz and the beam was close to the diffraction limit with a measured M(2) below 1.2.

No abstract