Acrylonitrile-butadiene-styrene (ABS) is a well-known discard product from the industry. This copolymer can be dissolved in organic solvents, and thin films can be created by immersion. Two requirements for coatings used for cultural heritage conservation purposes are transparency and reversibility, both fulfilled by ABS films. The aim of this work was to characterize the copolymer and to evaluate the electrochemical properties of ABS coatings applied to copper. Such performance was compared to that of a commercial varnish commonly used in conservation. The results indicate high protection values of the ABS film, generating a potential application for this waste material. The electrochemical techniques included electrochemical noise, impedance spectroscopy, and potentiodynamic polarization.

The production of thin films (nanocoatings) is a technological field with many applications to elaborate materials with new properties to be used as corrosion protection of traditional metals. Hydrophobicity is an example of such properties. In this chapter, an example of two hydrophobic corrosion coatings for possible use over aluminum heat exchanger geothermal power plants is discussed. Material substrate preparation, synthesis of hydrophobic sol-gel nanocoating, characterization, and electrochemical evaluation as a function of time of immersion, which are compared to another commercial fluorinated compound, are presented. Good corrosion protection was found for both hydrophobic coatings for possible application in geothermal heat exchangers.

Flame Thermal Spray (FTS) coatings frequently show some porosity and reduced adherence to substrate, which affect its properties, especially its corrosion resistance. In this work, the corrosion resistance of AISI 1018 carbon steel coated by different methods is compared: electroless nickel (EN) coating, NiCrFeBSi obtained by FTS, duplex coatings of an EN deposit on a layer of NiCrFeBSi obtained by FTS and a layer of NiCrFeBSi on an EN deposit. The coatings were characterized using optical microscopy and scanning electron microscopy techniques, EDS microprobe microanalysis, roughness as well as electrochemical polarization tests to obtain the corrosion rate. The results show the enhancement in the corrosion resistance in saline medium of the duplex coatings, especially of the EN coating on FTS layer.

No abstract

No abstract