The aim of this paper is to introduce dual-material auxetic meta-sandwiches by four-dimensional (4D) printing technology for reversible energy absorption applications. The meta-sandwiches are developed based on an understanding of hyper-elastic feature of soft polymers and elasto-plastic behaviors of shape memory polymers and cold programming derived from theory and experiments. Dual-material lattice-based meta-structures with different combinations of soft and hard components are fabricated by 4D printing fused deposition modelling technology. The feasibility and performance of reversible dual-material meta-structures are assessed experimentally and numerically. Computational models for the meta-structures are developed and verified by the experiments. Research trials show that the dual-material auxetic designs are capable of generating a range of non-linear stiffness as per the requirement of energy absorbing applications. It is found that the meta-structures with hyper-elastic and/or elasto-plastic features dissipate energy and exhibit mechanical hysteresis characterized by non-coincident compressive loading-unloading curves. Mechanical hysteresis can be achieved by leveraging elasto-plasticity and snap-through-like mechanical instability through compression. Experiments also reveal that the mechanically induced plastic deformation and dissipation processes are fully reversible by simply heating. The material-structural model, concepts and results provided in this paper are expected to be instrumental towards 4D printing tunable meta-sandwiches for reversible energy absorption applications.

The main objective of this paper is to introduce complex structures with self-bending/morphing/rolling features fabricated by 4D printing technology, and replicate their thermo-mechanical behaviors using a simple computational tool. Fused deposition modeling (FDM) is implemented to fabricate adaptive composite structures with performance-driven functionality built directly into materials. Structural primitives with self-bending 1D-to-2D features are first developed by functionally graded 4D printing. They are then employed as actuation elements to design complex structures that show 2D-to-3D shape-shifting by self-bending/morphing. The effects of printing speed on the self-bending/morphing characteristics are investigated in detail. Thermo-mechanical behaviors of the 4D-printed structures are simulated by introducing a straightforward method into the commercial finite element (FE) software package of Abaqus that is much simpler than writing a user-defined material subroutine or an in-house FE code. The high accuracy of the proposed method is verified by a comparison study with experiments and numerical results obtained from an in-house FE solution. Finally, the developed digital tool is implemented to engineer several practical self-morphing/rolling structures.

This article shows how four-dimensional (4D) printing technology can engineer adaptive metastructures that exploit resonating self-bending elements to filter vibrational and acoustic noises and change filtering ranges. Fused deposition modeling (FDM) is implemented to fabricate temperature-responsive shape-memory polymer (SMP) elements with self-bending features. Experiments are conducted to reveal how the speed of the 4D printer head can affect functionally graded prestrain regime, shape recovery and self-bending characteristics of the active elements. A 3D constitutive model, along with an in-house finite element (FE) method, is developed to replicate the shape recovery and self-bending of SMP beams 4D-printed at different speeds. Furthermore, a simple approach of prestrain modeling is introduced into the commercial FE software package to simulate material tailoring and self-bending mechanism. The accuracy of the straightforward FE approach is validated against experimental observations and computational results from the in-house FE MATLAB-based code. Two periodic architected temperature-sensitive metastructures with adaptive dynamical characteristics are proposed to use bandgap engineering to forbid specific frequencies from propagating through the material. The developed computational tool is finally implemented to numerically examine how bandgap size and frequency range can be controlled and broadened. It is found out that the size and frequency range of the bandgaps are linked to changes in the geometry of self-bending elements printed at different speeds. This research is likely to advance the state-of-the-art 4D printing and unlock potentials in the design of functional metastructures for a broad range of applications in acoustic and structural engineering, including sound wave filters and waveguides. much attention due to their lower density, higher recoverable strain of up to 400%, lower cost, simple shape programming procedure, and excellent controllability over the recovery temperature [3,4].In the recent two decades, three-dimensional (3D) printing technology, also known as additive manufacturing (AM), has gained considerable attention as an advanced manufacturing technique that can create complex objects through depositing materials in a layer-by-layer manner [5][6][7][8][9]. With the introduction of active materials, 3D printing approaches have shown excellent potential for the fabrication of adaptive structures, namely four-dimensional (4D) printed structures, with the capability of reshaping their configuration and changing their properties over time [10][11][12]. For the first time, Tibbits [13] experimentally demonstrated how 4D-printed objects could transform over time and perform self-assemblies. While 3D printing methods can be used to fabricate static structures, 4D printing methods allow the fabrication of dynamically reconfigurable architectures with desired functionality and responsiveness. Considering a specific application, 4D-printed objects can be designed to respond to environmental...

The accurate determination of residual stresses has a crucial role in understanding the complex interactions between microstructure, mechanical state, mode(s) of failure, and structural integrity. Moreover, the residual stress management concept contributes to industrial applications, aiming to improve the product's service performance and life cycle. In this regard, the industry requests rapid, efficient, and modern methods to identify and control the residual stress state. This review article contains three main sections. The first section covers different residual stress determination methods and reports the advancements over the recent decade. The second section includes the role of residual stresses in the performance of a broad range of materials including metallic alloys, polymers, ceramics, composites, and biomaterials. This is presented by classifying different science areas dealing with residual stresses into two main groups, including “origins” and “effects” of residual stresses. The range of topics covered are “welding, machining, curing/cooling, and spray coating processes,” “medical and dental sciences,” and “fatigue and fracture mechanisms.” The third section summarizes various strategies to effectively control residual stresses through different manufacturing procedures. It is hoped that the data provided herein serves as a valuable up‐to‐date reference for engineers and scientists in the field of residual stress.

No abstract