No abstract

The bioconvection flow of tiny fluid conveying the nanoparticles has been investigated between two concentric cylinders. The contribution of Lorenz force is also focused to inspect the bioconvection thermal transport of tiny particles. The tiny particles are assumed to flow between two concentric cylinders of different radii. The first cylinder remains at rest while flow is induced due to second cylinder which rotates with uniform velocity. Furthermore, the movement of tiny particles follows the principle of thermophoresis and Brownian motion as a part of thermal and mass gradient. Similarly, the gyro-tactic microorganisms swim in the nanofluid as a response to the density gradient and constitute bio-convection. The problem is modeled by using the certain laws. The numerical outcomes are computed by using RKF -45 method. The graphical simulations are performed for flow parameters with specific range like 1≤Re≤5, 1≤Ha≤5, 0.5≤Nt≤2.5, 1≤Nb≤3, 0.2≤Sc≤1.8, 0.2≤Pe≤1.0 and 0.2≤Ω≤1.0. It is observed that the flow velocity decreases with the increase in the Hartmann number that signifies the magnetic field. This outcome indicates that the flow velocity can be controlled externally through the magnetic field. Also, the increase in the Schmidt numbers increases the nanoparticle concentration and the motile density.

Natural fiber-reinforced polymer composite is a rapidly growing topic of research due to the simplicity of obtaining composites that is biodegradable and environmentally friendly. The resulting composites have mechanical properties comparable to synthetic fiber-reinforced composites. In this regard, the present work is formulated with the objectives related to the development, characterization, and optimization of the wt% of reinforcements and the process parameters. The novelty of this work is related to the identification and standardization of the appropriate wt% of reinforcements and parameters for the processing of the areca nut leaf sheath fiber-based polymer composites for enhanced performance attributes. With this basic purview and scope, the composites are synthesized using the hand layup process, and the composite samples of various fiber compositions (20%, 30%, 40%, and 50%) are fabricated. The mechanical characteristics of biodegradable polymer composites reinforced with areca nut leaf sheath fibers are investigated in the present work, with a focus on the effect of fiber composition (tensile properties, flexural strength, and impact strength). The properties of composites are enhanced by combining the areca nut leaf sheath fiber and epoxy resin, with a fiber content of 50% being the optimal wt%. The Scanning electron microscopy (SEM) investigations also ascertain this by depicting the good interfacial adhesion between the areca nut leaf sheath fiber and the epoxy resin. The tensile strength of the composite specimen reinforced with 50% areca nut fiber increases to 44.6 MPa, while the young’s modulus increases to 1900 MPa, flexural strength increases to 64.8 MPa, the flexural modulus increases to 37.9 GPa, and impact strength increases to 34.1 k J/m2. As a result, the combination of areca nut leaf sheath fiber reinforced epoxy resin shows considerable potential as a renewable and biodegradable polymer composite. Furthermore, areca nut leaf sheath fiber-reinforced epoxy resin composites are likely to replace petroleum-based polymers in the future. The ecosustainability and biodegradability of the composite specimen alongside the improved mechanical characteristics serve as the major highlight of the present work, and can help the polymer composite industry to further augment the synthetic matrix and fiber-based composites with the natural fiber-reinforced composites.

Welding process in vehicle structures has gained importance, especially for better strength and mechanical properties. Hence, there is vast research going on in the domain of newer welding techniques. Friction Stir Welding (FSW) is one of them. FSW is used in this research to join two different grades of aluminium alloys by varying the process parameters. The process parameters are optimized based on the Design of Experiments (DoE) and the Taguchi techniques. From the experimental findings for different process parameters, the optimized set of conditions involving the normal, transverse forces and the torque are determined. Further, the process methodology is validated.

No abstract