MAST is one of the new generation of large, purpose-built spherical tokamaks (STs) now becoming operational, designed to investigate the properties of the ST in large, collisionless plasmas. The first six months of MAST operations have been remarkably successful. Operationally, both merging-compression and the more usual solenoid induction schemes have been demonstrated, the former providing over 400 kA of plasma current with no demand on solenoid flux. Good vacuum conditions and operational conditions, particularly after boronization in trimethylated boron, have provided plasma current of over 1 MA with central plasma temperatures (ohmic) of order 1 keV. The Hugill and Greenwald limits can be exceeded and H mode achieved at modest additional NBI power. Moreover, particle and energy confinement show an immediate increase at the L-H transition, unlike the case of START, where this became apparent only at the highest plasma currents. Halo currents are small, with low toroidal peaking factors, in accordance with theoretical predictions, and there is evidence of a resilience to the major disruption.

Density-limit discharges in the W7-AS stellarator, with constant line-integrated density and a duration of up to 2 s, were studied at three values of the toroidal magnetic field (B = 0.8, 1.25 and 2.5 T). The central factor governing the physics of the density limit in stellarators was demonstrated to be the decreasing net power to the plasma when the centrally peaked radiated power density profile exceeds that of the deposited power density. The process was further accelerated by the peaking of electron density under these conditions. In discharges with B = 2.5 T, simulations of the centrally peaked radiation power density profiles could be shown to be due to peaked impurity density profiles. Laser blow off measurements clearly inferred an inward pinch of the injected aluminium. These discharges had the electron density profile form found in the improved confinement H-NBI mode on W7-AS.The aim of producing steady-state discharges at the highest possible density in stellarators is naturally of special interest for reactor operation. Such a scenario has been best achieved in H-mode discharges, in which ELMs restricted the impurity influx to the plasma and an equilibrium in the plasma parameters with suitably low radiation power levels was possible. A density scan in ECRH discharges highlights the need to control impurity sources and choose electron densities well below the density limit in order that steady-state operation can be attempted in discharges without ELMs.A simple model of bulk radiation predicted that the limiting density should depend on the square root of heating power and this was experimentally confirmed. The magnetic field scaling of the limiting density found experimentally in this simple model will partly depend on the term concerning the radial profile of the impurity density, which in turn is a function of the diffusion coefficient and inward pinch of the impurity ions. Theoretical studies have shown that an assumption about the B dependence of the thermal conductivity leads to density limit scaling laws with an explicit B dependence.

A combination of recently installed state-of-the-art imaging and profile diagnostics, together with established plasma simulation codes, are providing for the first time on Mega Ampère Spherical Tokamak (MAST) the tools required for studying confinement and transport, from the core through to the plasma edge and scrape-off-layer (SOL). The H-mode edge transport barrier is now routinely turned on and off using a combination of poloidally localized fuelling and fine balancing of the X-points. Theory, supported by experiment, indicates that the edge radial electric field and toroidal flow velocity (thought to play an important role in H-mode access) are largest if gas fuelling is concentrated at the inboard side. H-mode plasmas show predominantly type III ELM characteristics, with confinement H H factor (w.r.t. scaling law IPB98[y, 2]) around ∼1.0. Combining MAST H-mode data with the International Tokamak Physics Activities (ITPA) analyses, results in an L-H power threshold scaling proportional to plasma surface area (rather than P LH ∼ R 2 ). In addition, MAST favours an inverse aspect ratio

The Small Tight Aspect Ratio Tokamak (START) [A. Sykes et al., Nucl. Fusion 32, 769 (1994)] spherical tokamak has recently achieved the record value of toroidal β∼30% in a tokamak-like configuration. The improvements that have made these results possible are presented along with a description of the global equilibrium parameters of the discharges. The ideal magnetohydrodynamic (MHD) stability of these discharges is analyzed, and they are found to be in close proximity to both the ballooning limit and the external current driven kink limit, but they are found to be far from the pressure driven external kink limit. Disruptivity for a range of shots is not correlated with the normalized β limit, but does correlate well with the empirical high-li disruption limit. The transport properties of these high-β equilibria are analyzed and compared to conventional tokamak scaling laws and transport models. The global transport is at least as good as that predicted by the ITER97-ELMy (edge-localized) scaling law. The local ion transport is in good agreement with that predicted by neoclassical models. The electron transport is anomalous, showing rough agreement with the Lackner–Gottardi transport model.