GEOTRACES is an international research project on marine biogeochemical cycles of trace elements and their isotopes. GEOTRACES key trace metals in seawater are Al (8-1000 ng/kg), Mn (4-300 ng/kg), Fe (1-100 ng/kg), Cu (30-300 ng/kg), Zn (3-600 ng/kg), and Cd (0.1-100 ng/kg), of which global oceanic distribution will be determined on a number of research cruises. This work introduces a novel method of solid-phase extraction to determine Al, Mn, Fe, Co, Ni, Cu, Zn, Cd, and Pb in seawater by adjusting the pH of the sample to 6 and carrying out a single preconcentration step. The trace metals were collected from approximately 120 mL of seawater using a column of a chelating resin containing the ethylenediaminetriacetic acid functional group and eluted with approximately 15 mL of 1 M HNO3. Mn and Fe in the eluate were measured by inductively coupled plasma mass spectrometry (ICPMS) using the dynamic reaction cell mode, and the other metals were measured using the standard mode. Using this procedure, the trace metals were collected quantitatively, while >99.9% of alkali and alkaline earth metals in seawater were removed. The procedural blank was <7% of the mean concentration in deep ocean waters, except 16% for Pb. The overall detection limit was <14% of the mean concentration in deep ocean waters. The RSD was <9%. Our values for the trace metals in the certified reference materials of seawater NASS-5 and nearshore seawater CASS-4 agreed with the certified values (except that there is no certified value for Al). This method was also successfully applied to the reference materials of open-ocean seawater produced by the SAFe program. Our Fe concentrations were 5.9 +/- 0.7 ng/kg for surface water (S1) and 50.4 +/- 2.9 ng/kg for deep water (D2), which are in agreement with the interlaboratory averages of 5.4 +/- 2.4 and 50.8 +/- 9.5 ng/L, respectively. The data for other metals were oceanographically consistent.

No abstract

No abstract