The selective oxidation of hydrocarbons to the corresponding ketones with solvent-free and molecular oxygen as an oxidant is of great importance in academic and industrial fields in view of economy and environment.

Removal of organic micropollutants from water through advanced oxidation processes (AOPs) is hampered by the excessive input of energy and/or chemicals as well as the large amounts of residuals resulting from incomplete mineralization. Herein, we report a new water purification paradigm, the direct oxidative transfer process (DOTP), which enables complete, highly efficient decontamination at very low dosage of oxidants. DOTP differs fundamentally from AOPs and adsorption in its pollutant removal behavior and mechanisms. In DOTP, the nanocatalyst can interact with persulfate to activate the pollutants by lowering their reductive potential energy, which triggers a non-decomposing oxidative transfer of pollutants from the bulk solution to the nanocatalyst surface. By leveraging the activation, stabilization, and accumulation functions of the heterogeneous catalyst, the DOTP can occur spontaneously on the nanocatalyst surface to enable complete removal of pollutants. The process is found to occur for diverse pollutants, oxidants, and nanocatalysts, including various low-cost catalysts. Significantly, DOTP requires no external energy input, has low oxidant consumption, produces no residual byproducts, and performs robustly in real environmental matrices. These favorable features render DOTP an extremely promising nanotechnology platform for water purification.

No abstract

Recently, peroxymonosulfate (PMS)-based advanced oxidation processes have exhibited broad application prospects in the environment field. Accordingly, a simple, rapid, and ultrasensitive method is highly desired for the specific recognition and accurate quantification of PMS in various aqueous solutions. In this work, SO 4•− -induced aromatic hydroxylation was explored, and based on that, for the first time, a novel fluorescence method was developed for the PMS determination using Co 2+ as a PMS activator and benzoic acid (BA) as a chemical probe. Through a suite of spectral, chromatographic, and mass spectrometric analyses, SO 4•− was proven to be the dominant radical species, and salicylic acid was identified as the fluorescent molecule. As a result, a whole radical chain reaction mechanism for the generation of salicylic acid in the BA/PMS/Co 2+ system was proposed. This fluorescence method possessed a rapid reaction equilibrium (<1 min), an ultrahigh sensitivity (detection limit = 10 nM; quantification limit = 33 nM), an excellent specificity, and a wide detection range (0−100 μM). Moreover, it performed well in the presence of possible interfering substances, including two other peroxides (i.e., peroxydisulfate and hydrogen peroxide), some common ions, and organics. The detection results for real water samples further validated the practical utility of the developed fluorescence method. This work provides a new method for the specific recognition and sensitive determination of PMS in complex aqueous solutions.