Band gap engineering of atomically thin two-dimensional layered materials is critical for their applications in nanoelectronics, optoelectronics, and photonics. Here we report, for the first time, a simple one-step chemical vapor deposition approach for the simultaneous growth of alloy MoS2xSe2(1-x) triangular nanosheets with complete composition tunability. Both the Raman and the photoluminescence studies show tunable optical properties consistent with composition of the alloy nanosheets. Importantly, all samples show a single bandedge emission peak, with the spectral peak position shifting from 668 nm (for pure MoS2) to 795 nm (for pure MoSe2), indicating the high quality for these complete composition alloy nanosheets. These band gap engineered 2D structures could open up an exciting opportunity for probing their fundamental physical properties in 2D and may find diverse applications in functional electronic/optoelectronic devices.

BackgroundMicrofluidics is a science and technology that precisely manipulates and processes microscale fluids. It is commonly used to precisely control microfluidic (10 −9 to 10 −18 L) fluids using channels that range in size from tens to hundreds of microns and is known as a "lab-on-a-chip" [1][2][3][4]. The microchannel is small, but has a large surface area and high mass transfer, favoring its use in microfluidic technology applications including low regent usage, controllable volumes, fast mixing speeds, rapid responses, and precision control of physical and chemical properties [1,5,6]. Microfluidics integrate sample preparation, reactions, separation, detection, and basic operating units such as cell culture, sorting and cell lysis [7]. For these reasons, interest in OOAC has intensified [8]. OOAC combines a range of chemical, biological and material science disciplines [9] and was selected as one of the "Top Ten Emerging Technologies" in the World Economic Forum [10].OOAC is a biomimetic system that can mimic the environment of a physiological organ, with the ability to regulate key parameters including AbstractThe organ-on-a-chip (OOAC) is in the list of top 10 emerging technologies and refers to a physiological organ biomimetic system built on a microfluidic chip. Through a combination of cell biology, engineering, and biomaterial technology, the microenvironment of the chip simulates that of the organ in terms of tissue interfaces and mechanical stimulation. This reflects the structural and functional characteristics of human tissue and can predict response to an array of stimuli including drug responses and environmental effects. OOAC has broad applications in precision medicine and biological defense strategies. Here, we introduce the concepts of OOAC and review its application to the construction of physiological models, drug development, and toxicology from the perspective of different organs. We further discuss existing challenges and provide future perspectives for its application.

Directional growth of ultralong nanowires (NWs) is significant for practical application of large-scale optoelectronic integration. Here, we demonstrate the controlled growth of in-plane directional perovskite CsPbBr NWs, induced by graphoepitaxial effect on annealed M-plane sapphire substrates. The wires have a diameter of several hundred nanometers, with lengths up to several millimeters. Microstructure characterization shows that CsPbBr NWs are high-quality single crystals, with smooth surfaces and well-defined cross section. The NWs have very strong band-edge photoluminescence (PL) with a long PL lifetime of ∼25 ns and can realize high-quality optical waveguides. Photodetectors constructed on these individual NWs exhibit excellent photoresponse with an ultrahigh responsivity of 4400 A/W and a very fast response speed of 252 μs. This work presents an important step toward scalable growth of high-quality perovskite NWs, which will provide promising opportunities in constructing integrated nanophotonic and optoelectronic systems.

Cesium lead halide perovskite nanowires have emerged as promising low-dimensional semiconductor structures for integrated photonic applications. Understanding light-matter interactions in a nanowire cavity is of both fundamental and practical interest in designing low-power-consumption nanoscale light sources. In this work, high-quality in-plane aligned halide perovskite CsPbX (X = Cl, Br, I) nanowires are synthesized by a vapor growth method on an annealed M-plane sapphire substrate. Large-area nanowire laser arrays have been achieved based on the as-grown aligned CsPbX nanowires at room temperature with quite low pumping thresholds, very high quality factors, and a high degree of linear polarization. More importantly, it is found that exciton-polaritons are formed in the nanowires under the excitation of a pulsed laser, indicating a strong exciton-photon coupling in the optical microcavities made of cesium lead halide perovskites. The coupling strength in these CsPbX nanowires is dependent on the atomic composition, where the obtained room-temperature Rabi splitting energy is ∼210 ± 13, 146 ± 9, and 103 ± 5 meV for the CsPbCl, CsPbBr, and CsPbI nanowires, respectively. This work provides fundamental insights for the practical applications of all-inorganic perovskite CsPbX nanowires in designing light-emitting devices and integrated nanophotonic systems.

Band gap engineering of transition-metal dichalcogenides is an important task for their applications in photonics, optoelectronics, and nanoelectronics. We report for the first time the continuous lateral growth of composition graded bilayer MoS(2(1-x))Se(2x) alloys along single triangular nanosheets by an improved chemical vapor deposition approach. From the center to the edge of the nanosheet, the composition can be gradually tuned from x = 0 (pure MoS2) to x = 0.68, leading to the corresponding bandgap being continuously modulated from 1.82 eV (680 nm) to 1.64 eV (755 nm). Local photoluminescence scanning from the center to the edge gives single band edge emission peaks, indicating high crystalline quality for the achieved alloy nanosheets, which was further demonstrated by the microstructure characterizations. These novel 2D structures offer an interesting system for probing the physical properties of layered materials and exploring new applications in functional nanoelectronic and optoelectronic devices.