This study details a new derivative of the contorted HBCs that self-organizes into one-dimensional, single-crystalline fibers. X-ray diffraction, transmission electron microscopy, and electron diffraction studies show that they have an orthorhombic unit cell with dimensions of 5.8 nm x 4.5 nm x 0.45 nm. Each fiber is composed of a few thousands columns. A method is put forth that utilizes elastomer stamps to manipulate and position isolated fibers in organic field effect transistors.

Understanding the Cu-catalyzed electrochemical CO 2 reduction reaction (CO 2 RR) under ambient conditions is both fundamentally interesting and technologically important for selective CO 2 RR to hydrocarbons. Current Cu catalysts studied for the CO 2 RR can show high activity but tend to yield a mixture of different hydrocarbons, posing a serious challenge on using any of these catalysts for selective CO 2 RR. Here, we report a new perovskite-type copper(I) nitride (Cu 3 N) nanocube (NC) catalyst for selective CO 2 RR. The 25 nm Cu 3 N NCs show high CO 2 RR selectivity and stability to ethylene (C 2 H 4 ) at −1.6 V (vs reversible hydrogen electrode (RHE)) with the Faradaic efficiency of 60%, mass activity of 34 A/g, and C 2 H 4 /CH 4 molar ratio of >2000. More detailed electrochemical characterization, X-ray photon spectroscopy, and density functional theory calculations suggest that the high CO 2 RR selectivity is likely a result of (100) Cu(I) stabilization by the Cu 3 N structure, which favors CO−CHO coupling on the (100) Cu 3 N surface, leading to selective formation of C 2 H 4 . Our study presents a good example of utilizing metal nitrides as highly efficient nanocatalysts for selective CO 2 RR to hydrocarbons that will be important for sustainable chemistry/energy applications.

MoO(x) has been used for organic semiconductor doping, but it had been considered an inefficient and/or unstable dopant. We report that MoO(x) can strongly and stably dope carbon nanotubes and graphene. Thermally annealed MoO(x)-CNT composites can form durable thin film electrodes with sheet resistances of 100 Ω/sq at 85% transmittance plain and 85 Ω/sq at 83% transmittance with a PEDOT:PSS adlayer. Sheet resistances change less than 10% over 20 days in ambient and less than 2% with overnight heating to 300 °C in air. The MoO(x) can be easily deposited either by thermal evaporation or from solution-based precursors. Excellent stability coupled with high conductivity makes MoO(x)-CNT composites extremely attractive candidates for practical transparent electrodes.