We describe the fabrication of elliptical Au nanodisk arrays as a localized surface plasmon resonance (LSPR) sensing substrate for clinical immunoassay via thermal nanoimprint lithography (NIL) and enhancement in the sensitivity of the detection of the prostate-specific antigen (PSA) using the precipitation of 5-bromo-4-chloro-3-indolyl phosphate p-toluidine/nitro blue tetrazolium (BCIP/NBT), catalyzed by alkaline phosphatase. Au nanodisks were fabricated on glass through an unconventional tilted evaporation, which could preserve the thickness of imprinted resists and create an undercut beneficial to the subsequent lift-off process without any damage to pattern dimension and the glass while removing the residual polymers. To investigate the optically anisotropic property of the LSPR sensors, a probe light with linear polarization parallel to and perpendicular to the long axis of the elliptical nanodisk array was utilized, and their sensitivity to the bulk refractive index (RI) was measured as 327 and 167 nm/RIU, respectively. To our knowledge, this is the first application of enzyme-substrate reaction to sandwich immunoassay-based LSPR biosensors that previously suffered from a low sensitivity due to the short penetration depth of the plasmon field, especially when large-sized antibodies were used as bioreceptors. As a result, a large change in local refractive index because of the precipitation on the Au nanodisks amplified the wavelength shift of the LSPR peak in the vis-NIR spectrum, resulting in femtomolar detection limits, which was ∼10(5)-fold lower than the label-free detection without the enzyme precipitation. This method can be extended easily to the other clinical diagnostics with a high sensitivity.

No abstract

The practical limits of coinage-metal-based plasmonic materials demand sustainable, abundant alternatives with a wide plasmonic range of the solar energy spectrum. Aluminum (Al) is an emerging alternative, but its instability in aqueous environments critically limits its applicability to various light-harvesting systems. Here, we report a design strategy to achieve a robust platform for plasmon-enhanced light harvesting using Al nanostructures. The incorporation of mussel-inspired polydopamine nanolayers in the Al nanoarrays allowed for the reliable use of Al plasmonic resonances in a highly corrosive photocatalytic redox solution and provided nanoscale arrangement of organic photosensitizers on Al surfaces. The Al-photosensitizer core-shell assemblies exhibited plasmon-enhanced light absorption, which resulted in a 300% efficiency increase in photo-to-chemical conversion. Our strategy enables stable and advanced use of aluminum for plasmonic light harvesting.