Three types of bimetallic Pt–Pd nanoparticles with different core–shell structures besides Pt and Pd nanoparticles were synthesized by coreduction and sequential reduction methods in ethylene glycol. The synthesized nanoparticles were supported on carbon to prepare five different electrocatalysts Pt/C, Pd/C, PdPt alloy/C, Pd­(core)–Pt­(shell)/C, and Pt­(core)–Pd­(shell)/C for oxygen reduction reaction (ORR) in fuel cells. The nanoparticles and supported catalysts were characterized by means of transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), extended X-ray absorption fine structure (EXAFS), and cyclic voltammetry (CV). It was proposed by these characterizations that the PdPt alloy/C, Pd­(core)–Pt­(shell)/C, and Pt­(core)–Pd­(shell)/C catalysts constituted Pd4Pt1(core)–Pt­(two-layers shell), Pd (core)–Pd2Pt1(three-layers)–Pt­(three-layers shell), and Pt­(core)–Pt2Pd1(two-layers)–Pd (microcrystal shell), respectively. The Pt surface-enriched catalysts were more stable than the Pd surface-enriched catalysts in long-term CV scanning in acid electrolyte. The Pt/C, PdPt alloy/C, and Pd­(core)–Pt­(shell)/C catalysts with Pt-enriched surfaces showed much higher ORR specific activity than the Pd/C and Pt­(core)–Pd­(shell)/C catalysts with Pd-enriched surfaces. The Pt surface-enriched bimetal catalysts with core–shell structures showed the higher Pt-based mass activity than the Pt monometal catalyst. The PdPt catalysts with Pd/Pt = 2 and 4 in an atomic ratio were also prepared by the coreduction method. The Pt-enriched surfaces formed also with these samples, but the ORR specific activity and (Pd + Pt)-based mass activity decreased with increasing Pd/Pt ratios (1, 2, and 4). The present study provided core–shell catalysts with better ORR activity, which may be useful for understanding key issues to develop next-generation fuel-cell cathode catalysts.

The electrochemical activity and durability of Pt nanoparticles on different kinds of carbon supports in oxygen reduction reactions (ORR) were investigated using rotating disc electrodes (RDE) and the membrane electrode assemblies (MEA) of polymer electrolyte fuel cells (PEFC). The mass activity of Pt/C catalysts (ORR activity per 1 mg of Pt) at the RDE decreased, according to the type of carbon support, in the following order; Ketjenblack (KB) > acetylene black (AB) > graphene > multiwall carbon nanotube (MW-CNT) > carbon black (CB), whereas the average size of the Pt nanoparticles and the surface specific activity (ORR activity per electrochemical surface area) did not vary significantly between these carbon supports. These results indicate that the different mass activities of the Pt/C catalysts may originate from the differences in the fraction of Pt on the carbon supports which is available for utilization. The durability of the MEAs of the top two active catalysts Pt/KB and Pt/AB among the five catalysts was examined based on ORR performance, TEM and in situ XAFS. It was found that the performance of the Pt/KB cathode catalyst in PEFC MEA decreased significantly over 500 accelerated durability test (ADT) cycles, whereas the performance of the Pt/AB cathode catalyst in PEFC MEA did not decrease significantly during 500 ADT cycles, it was also found that the Pt/AB possesses 8 times higher durability compared with the Pt/KB. In situ Pt LIII-edge XAFS data in the ADT cycles and stepwise potential operations revealed the different oxidation-reduction behaviors of the Pt nanoparticles on the KB and AB supports. The Pt/KB was oxidized to form surface PtO layers more easily than the Pt/AB in the increasing potential operation from 0.4 VRHE to 1.4 VRHE, and the surface PtO layers of the Pt/AB were reduced to the metallic Pt state more readily than those of the Pt/KB in the decreasing potential operation from 1.4 VRHE to 0.4 VRHE. The XAFS analysis for the Pt valences and the coordination numbers of Pt-O and Pt-Pt demonstrated that the Pt/AB catalyst is more durable than the Pt/KB catalyst in PEFC MEAs.

We have prepared and characterized a SnO2-decorated Pt-Sn(oxidized)/C cathode catalyst in a polymer electrolyte fuel cell (PEFC). Oxygen reduction reaction (ORR) performance of Pt/C (TEC10E50E) remained almost unchanged or even tended to reduce in repeated I-V load cycles, whereas the I-V load performance of the Pt-Sn(oxidized)/C prepared by controlled oxidation of a Pt-Sn alloy/C sample with the Pt3Sn phase revealed a significant increase with increasing I-V load cycles. The unique increase in the ORR performance of the Pt-Sn(oxidized)/C catalyst was ascribed to a promoting effect of SnO2 nano-islands formed on the surface of Pt3Sn core nanoparticles. Also in a rotating disk electrode (RDE) setup, the mass activity of an oxidized Pt3Sn/C catalyst was initially much lower than that of a Pt/C catalyst, but it increased remarkably after 5000 rectangular durability cycles and became higher than that of the fresh Pt/C. The maximum power density per electrochemical surface area for the Pt-Sn(oxidized)/C catalyst in a PEFC was about 5 times higher than that for the Pt/C catalyst at 0.1-0.8 A cm(-2) of the current density. In situ X-ray absorption near-edge structure (XANES) analysis at the Pt LIII-edge in increasing/decreasing potential operations and at the Sn K-edge in the I-V load cycles revealed a remarkable suppression of Pt oxidation compared with the Pt/C catalyst at higher potentials and no change in the Sn oxidation state, respectively, resulting in higher performance and stability of the Pt-Sn(oxidized)/C catalyst due to the SnO2 nano-islands under the PEFC operation conditions. The SnO2 nano-island decorated Pt-Sn(oxidized)/C catalyst with a Pt3Sn alloy nanostructure is regarded as a promising candidate for a PEFC cathode catalyst.

Absrracf -We have assembled thermal probes with single carbon nanotubes (CNTs) for sensing temperature distribution in local area. The temperature coeffecient of resistance of the thermal probes shows the positive characteristics. The feasibility of the CNT thermal probes for scanning local area temperature is investigated in nanometer order. We have implemented the assembled CNT thermal probes for temperature measurement and calibration of CNT nanoheater, and demonstrated them to be novel temperature sensors.

No abstract