A 5- to 50-kHz synthetic cylindrical nearfield calibration array

Abstract

The direct measurement of farfield acoustic radiation from underwater transducers in a shore-based facility is often impossible because of the limited size of measurement tanks. The Trott nearfield calibration array (NFCA) concept solves this problem by allowing the farfield radiation to be determined from measurements made close to the transducer. We describe here the development of a 5- to 50-kHz synthetic cylindrical NFCA that is suitable for measurement tanks as small as about 2.5 m in each dimension and that can be operated at hydrostatic pressures up to 6.8 MPa. The NFCA is synthesized using a single line of 48 piezoelectric ceramic hydrophone elements spaced 2.54-cm apart center-to-center and amplitude shaded in a special way. The transducer to be calibrated is driven electrically and rotated near the line about an axis parallel to the line. The response of the line is measured at equally spaced angular positions, thereby creating a virtual cylindrical array surrounding the transducer. We then obtain the azimuthal farfield pattern of the transducer by computer processing the angular responses together with a set of complex shading coefficients. We evaluated the line experimentally by calibrating a large piston transducer in a cylindrical measurement tank less than 2.5 m in diameter. The resulting computed farfield patterns are in excellent agreement with corresponding patterns obtained from direct farfield measurements made in a lake.

Measurement of acoustic properties for passive-material samples using multichannel inverse filter

“…element, i.e., only one projecting transducer is employed, the MIF is simplified as the single-channel inverse filter. 9,10 From the view point of the array shading, 15 the MIF may be regarded as a form of using this technique to improve the directional response and the signal waveform by optimizing the objective function in Eq. (3).…”

Discriminating between the nearfield and the farfield of acoustic transducers

“…In some other cases, such as those involving very large transducers and arrays, special facilities have been built and configured to effectively simulate farfield conditions while operating in the nearfield. [39][40][41] C. Rationale and organization of study…”