A comparative study of PODE/gasoline and n-heptane/gasoline in a spark-assisted homogeneous charge compression ignition engine with dual-injection strategies and EGR

Abstract

Homogeneous charge compression ignition (HCCI) has potential to improve thermal efficiency for gasoline engine due to the similar formation of mixture between HCCI and traditional spark ignition mode. High reactivity fuel combined with gasoline is used to achieve HCCI combustion with a relative low compression ratio. Polyoxymethylene dimethyl ethers (PODE) is a kind of low-carbon fuels with unique molecule structure, which is beneficial for carbon neutral. The intermediate products of PODE are different from those of long-chain alkane such as n-heptane and diesel. In this paper, the difference in spark-assisted HCCI (SA-HCCI) combustion combined with spark ignition and EGR between PODE/gasoline and n-heptane/gasoline under different operating conditions were investigated. The results illustrated that PODE/gasoline was more suitable for SA-HCCI combustion due to the positive relation between thermal efficiency and gasoline percentage, which can significantly improve the thermal efficiency while suppressing knock. Although the cetane number of PODE is greater than the n-heptane, the SA-HCCI combustion was more violent fueled with n-heptane/gasoline than that of PODE/gasoline. Low NOx and PM emissions are achieved for SA-HCCI combustion especially for PODE/gasoline. The advancing spark timing reduced the incomplete combustion and shortened the combustion duration, thus reducing the THC and CO emissions, especially fueled with PODE/gasoline. Although a low EGR rate can slightly improve the THC and CO emissions, violent combustion can be significantly improved. In general, high efficiency and low emissions could be achieved by PODE/gasoline and spark ignition combined with EGR. The brake thermal efficiency for SA-HCCI combustion fueled with PODE/gasoline increased by 30% compared with DISI mode under the same loads.