A composite soft bending actuation module with integrated curvature sensing

Abstract

Soft robotics carries the promise of making robots as capable and adaptable as biological creatures, but this will not be possible without the ability to perform self-sensing and control with precision and repeatability. In this paper, we seek to address this need with the development of a new pneumatically-actuated soft bending actuation module with integrated curvature sensing. We designed and fabricated two different versions of this module: One with a commercially available resistive flex sensor and the other with a magnetic curvature sensor of our own design, and used an external motion capture system to calibrate and validate these two approaches. In addition, we used an iterative sliding mode controller to drive the modules through step curvature references to demonstrate the controllability of the modules as well as compare the usability of the two sensors. We found that the magnetic sensor returned noisy but accurate data, while the flex sensor had minor inaccuracies and it was subject to overshoot but did not exhibit notable noise. Experimental results show that this phenomenon of overshoot from the flex sensor causes active feedback control of the bending actuator to exhibit significant positioning errors. This work demonstrates that our soft bending actuator can be controlled with repeatability and precision, and that our magnetic curvature sensor represents an improvement for use in proprioception and closed-loop control of soft robotic devices.

A review on recent advances in soft surgical robots for endoscopic applications

“…Miniature magnet that exhibits Hall effect is embedded in robot elastomer matrix to sense the strain of the robot (eg,). Noncontact nature of magnetic measurement has benefits including small dynamic artifacts, less effect on the mechanical properties of the elastomer, and small hysteresis …”

“…Noncontact nature of magnetic measurement has benefits including small dynamic artifacts, less effect on the mechanical properties of the elastomer, and small hysteresis. 37…”

A Validated Physical Model For Real-Time Simulation of Soft Robotic Snakes

“…The chambers are wrapped with a fiber reinforcement, preventing it from increasing in radius when pressure is applied. The center of the link contains an inextensible layer that prevents it from expanding in length [11]. The tiny spheres attached to the rigid plates are markers used for tracking the curvature in the experiments.…”

“…In this work, we aim to develop a real-time, high-fidelity simulation for soft robotic systems. We present a compliant constraint dynamics model for a soft snake robot [11,12,13]. Our model is able to accurately represent the deformations of the snake links while being efficient enough for realtime simulations.…”

CNT-based sensor arrays for local strain measurements in soft pneumatic actuators

“…In a more recent study (Morrow et al 2016), multiple soft strain sensors made of eGaIn were integrated along a SPA structure, but this injecting process can be challenging and lead to entrapped air inside the sensing layer. By using sensors built in an integrated circuit (IC) the sensing accuracy can be increased (Ozel et al 2016), but its rigid parts can compromise the flexibility of the soft-bodied device.…”