A contribution of X ray diffraction analysis in the determination of creep of Si3N4 ceramics

Abstract

The understanding of the creep behavior of silicon nitride (Si3N4) is extremely complex because of a large number of parameters influencing simultaneously the creep deformation of the materials. In general, the main creep mechanisms acting in these materials are grain boundary sliding or materials transport by solution-precipitation process. In this work, the creep behavior has been monitored by X ray diffraction analysis, determining the peak intensity ratio of the (101) and (210) planes of b-Si3N4. This characterization technical, allied the microstructural analysis can contribute to determination of creep mechanisms acting in material. The beta-Si3N4 grains are highly elongated with aspect ratios ranging between 3 and 11. Therefore, the intensity of the peaks related to the basal plane (101) tends to be higher when compared to the lateral planes (210). During creep deformation occurs alignment of the elongated beta-Si3N4 grains in the plane parallel to the direction of the applied load, reflecting in the peak intensity ratio. Crept samples presented variations in the (101)/(210) peak intensity ratio of beta-Si3N4 indicating that grain rotation can to be contributing with creep deformation. In this way, the use of X ray diffractometry as a mean to characterize microstructural changes during creep has been shown successfully

Improving mechanical properties and microstructure development of fiber reinforced ceramic nuclear fuel.

“…This is due to the flaw size and distribution, which are responsible for failure, all over the ceramic matrix. For designing ceramic components a probabilistic approach is used in which the scatter is represented in a quantitative way so that these materials can be safely used [132].…”