A factors affecting compressibility of ultrasonic compaction for high efficiency electrical motor core fabricated soft magnetic composite

Rok, Hyun; Jeon, Seoung Kyu; Kim, Kyung Soo; Nakamura, Kentaro

doi:10.1109/icems.2009.5382896

Cited by 1 publication

(1 citation statement)

References 2 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Collector pressing allows reducing the dispersion of the density distribution (had decreased by a factor of 10), while the relative density differential along the green compact height had decreased by 60%. Chal et al dealt with the compressibility of ultrasonic compaction . They studied the improvement in the resultant density as function of the compression pressure, the vibration amplitude/frequency and the input power.…”

Section: Introductionmentioning

confidence: 99%

Effect of molding pressure on structural and densification behavior of microwave‐sintered ceramic tool material

Yin

Hong

et al. 2019

Int J Applied Ceramic Tech

View full text Add to dashboard Cite

The die‐pressed Al2O3‐based ceramic compacts for microwave sintering were prepared using uniaxial molding pressure. Effect of molding pressure on density distribution, microstructure, and mechanical properties of both green and sintered compacts were studied by simulation and experiments. The results suggested that the density distribution of green compact showed obvious stratification phenomenon as the pressure increased. High pressure could increase the density of green compact but led to large density variation. Cracks were formed within the sintered compact due to the severe stress concentration at high molding pressure. Better mechanical properties were obtained at the pressure of 200‐300°MPa. The optimal mechanical properties of Al2O3/Ti(C,N) ceramic tool were obtained at 1550°C with the soaking time of 10 minutes, which were as high as that of conventional sintering, but the sintering period was sharply shortened.

show abstract

Section: Introductionmentioning

confidence: 99%