A Fault Ride-Through Technique for PMSG wind turbines using Superconducting Magnetic Energy Storage (SMES) under Grid voltage sag conditions.

Abstract

Wind power penetration is growing, posing considerable technological challenges for developing electrical grid systems. Gearless permanent magnet synchronous generator (PMSG) wind energy conversion systems (WECS) are becoming more popular. On the flip side, they are susceptible to grid failures. The use of Superconducting Magnetic Energy Storage (SMES) to enhance fault ride-through in PMSG wind turbines is investigated. Per the current Grid code trends, WECS are not to be disconnected from the grid; rather, they should provide reactive power support during such situations. This work incorporates machine and grid side converters to manage reactive, active power and DC-link voltage during grid failures. To improves system performance, lessen voltage dips at the point of common coupling (PCC), provide reactive power support and reduce the transient length, a DC-link capacitor is used with SMES. SMES reserve energy capacity is necessary for FRT operation when the wind turbine's inertial response range is insufficient. Finally, a 1.5 MW PMSG-based WTG with SMES is developed. The Pre-fault, fault-period, and post-fault performance are all assessed. They confirm the system's efficiency, speed, and stability.

A model predictive control strategy for enhancing fault ride through in PMSG wind turbines using SMES and improved GSC control

“…However, some SMES-based schemes that involve adding a dcac inverter and control adjustments in the external circuit can lead to increased capital costs and control complexity (Zheng et al, 2017;Morgan et al, 2022b). Additionally, these schemes may not be costeffective since they require additional devices like SMES to enhance FRT in PMSG WTGs.…”