A Finite Element Model of the Foot and Ankle for Automotive Impact Applications

Abstract

A finite element (FE) model of the foot and leg was developed to improve understanding of injury mechanisms of the ankle and subtalar joints during vehicle collisions and to aid in the design of injury countermeasures. The FE model was developed based on the reconstructed geometry of a male volunteer close to the anthropometry of a 50th percentile male and a commercial anatomical database. While the forefoot bones were defined as rigid bodies connected by ligament models, the surrounding bones of the ankle and subtalar joints and the leg bones were modeled as deformable structures. The material and structural properties were selected based on a synthesis of current knowledge of the constitutive models for each tissue. The whole foot and leg model was validated in different loading conditions including forefoot impact, axial rotation, dorsiflexion, and combined loadings. Overall results obtained in the model validation indicated improved biofidelity relative to previous FE models. The developed model was used to investigate the injury tolerance of the ankle joint under brake pedal loading for internally and externally rotated feet. Ligament failures were predicted as the main source of injury in this loading condition. A 12% variation of failure moment was observed in the range of axial foot rotations (±15°). The most vulnerable position was the internally rotated (15°) posture among three different foot positions. Furthermore, the present foot and ankle model will be coupled together with other body region FE models into the state-of-art human FE model to be used in the field of automotive safety.

Modular use of human body models of varying levels of complexity: Validation of head kinematics

“…The development of this HBM was based on a multimodality medical image and external anthropometry data set of a volunteer representing a 50th percentile male in terms of height (174.9 cm) and weight (78.6 ± 0.77 kg), described by Gayzik et al (Gayzik et al 2011;Gayzik et al 2012). The model has since undergone numerous validation simulations at both the regional (e.g., DeWit et al 2012;Li et al 2010;Shin et al 2012;Soni et al 2015) and full body levels (e.g., Hayes et al 2014;Toyota 2010;Yang et al 2006). Additional information on the development of the model can be found in the GHBMC M50 user's manual (GHBMC 2011).…”

Parametric Modal Study and Optimization of the Floor Pan of a B-Segment Automotive Using a Hybrid Method of Taguchi and a Newly Developed MCDM Model

“…Today, Computer-Aided Engineering (CAE) is known as a necessary technique which helps the engineers to remarkably save time and money in the design and manufacturing process. In the recent years, a wide range of studies have been carried out to develop Finite Element (FE) analyses as alternatives of the experimental conventional procedures of automotive design such as (Noise, Vibration and Harshness) NVH Sobieski et al (2001), safety Shin et al (2012) and strength Palmonella et al (2005).…”

Development of a Computationally Efficient Full Human Body Finite Element Model

“…A new cortical thickness mapping technique was applied to the coxal bone from CT images and the effects of posture on hip injury tolerance were analyzed (Kim et al 2012;Yue et al 2014). The lower limbs were also tested under complex loading resulting from blunt impacts Shin et al 2012;Untaroiu et al 2013). The fullbody M50-O was validated by mass distribution and in a variety of hub and lateral impacts Park et al 2013;Vavalle et al 2015;Vavalle et al 2012).…”