“…This problem is partly overcome in our Δ S calculations by the choice of maximum MI S concentration, which is typically found in MIs with MgO contents that closely matches the carrier melt. - Different volatile species need to be treated separately because of their differing solubilities and diffusion rates in melts (Baker et al., 2005), and additional factors that affect their concentrations in melts and their preservation in MIs, listed below in detail.
- Accurate CO 2 measurements in MIs are complicated by the necessity to account for vapor bubbles and mineral precipitates on the bubble walls, which can host more than 90% of the CO 2 contained in the MI (Hartley et al., 2014; Moore et al., 2015; Rasmussen et al., 2020; Schiavi et al., 2020), and decrepitation, which leads to loss of CO 2 (Maclennan, 2017). Bubbles in MIs may also host S as gas or precipitates (Venugopal et al., 2020), but the effect on total MI S contents may be insignificant (Korneeva et al., 2023; Rasmussen et al., 2020). Bubbles are present in 17%–65% of investigated MIs in eight studies in IMIC where they are reported (Hartley et al., 2014; Hauri et al., 2018; Matthews et al., 2021; Miller et al., 2019; Moune et al., 2007, 2012; Neave et al., 2014, 2017).
…”