A model study for cyclic thermal loading and thermal performance of a thermoelectric generator

Abstract

SUMMARY Thermal cyclic loading influences the life cycle of the thermoelectric device pins because of the thermal stress developed in the pins. Although thermal efficiency improves for different geometric configurations of the device pins, development of thermal stresses limit the selection of pin geometry in practical applications, particularly under cyclic thermal loading. Consequently, in the present study, thermal stress analysis of thermoelectric pins under cyclic thermal loading is carried out. The influence of thermoelectric pin geometry on the stress levels is examined when the device is subjected to the thermal cyclic loading. The predictions of thermal stress distribution are validated with the data presented in the open literature. It is found that pin geometric configuration has a significant effect on the stress levels developed in the pin when subjected to cyclic thermal loading. The pin configuration RA = 1 (parallel pins) results in the minimum value of the maximum von Mises stress in the pins as compared to that corresponding to other configurations. Copyright © 2014 John Wiley & Sons, Ltd.

Thermoelectric conversion of waste heat from IC engine-driven vehicles: A review of its application, issues, and solutions

“…Hatzikraniotis et al showed that thermal cycling causes reduction in Seebeck effect and increase in thermal resistivity of TE elements, which in turn reduces the lifetime and efficiency of TEG modules. Al‐Merbati et al examined thermal stresses caused as a result of thermal cycling on TE elements. They showed that thermal cyclic loading influences the life cycle of the TE elements in a TEG module.…”

A review and selection of engine waste heat recovery technologies using analytic hierarchy process and grey relational analysis

“…Researchers have optimized the working performance of the TEG from structural parameters, exergy analysis, algorithm optimization, and so on [26][27][28][29][30]. The development of thermoelectric material technology and ICE manufacturing process have promoted the application of thermoelectric A review and selection of engine waste heat recovery technologies X.…”

Design and fabrication of thermoelectric waste heat reutilization system-possible industrial application

“…Sahin and Yilbas examined the performance characteristics of thermoelectric generators and confirmed that the operating temperature primarily contributed to the maximum output of the generator modules. Al‐Merbati et al reported the temperature stress values for module pins to establish the validation of thermal stress distribution in the context of the thermoelectric modules being subjected to cyclic loading. Sharma presented his research on dynamic pressure‐concentration isotherm properties of pairs of low‐temperature and high‐temperature metal hydrides and compared the results to static PCIs.…”