A Multi-Objective Multi-Technology (MOMT) Evaluation and Analysis Framework for Ammonia Synthesis Process Development

A review on green liquid fuels for the transportation sector: a prospect of microbial solutions to climate change

“…NH3 is industrially produced using the Haber-Bosch process (costing ~495 USD/t NH3) in which N2 from air is reacted with CH4-derived H2 in the presence of a Ru or Fe catalyst to generate NH3 (Smil, 2001;Li et al, 2019). The process, however, is accomplished at high temperature and pressure; typically, at 475 °C and 20 MPa, respectively.…”

Towards technology, economy, energy and environment oriented simultaneous optimization of ammonia production process: Further analysis of green process

“…Different processes are available for water electrolysis like alkaline electrolysis and polymer electrolyte membranes (PEM) electrolysis, and high-temperature solid-oxide electrolysis (SOE). The first two processes operate at low temperatures while the latter operate at relatively higher temperatures [ [13] , [14] , [15] ]. PEM electrolysis is more flexible with faster dynamic response and higher efficiency with a compact design compared to alkaline electrolysis [ 16 ].…”

Incorporation of Sustainability Education into the Ammonia Synthesis Process Design of the Chemical Engineering Senior Design Course

“…The extended TEA provided in the design class is to address the sustainable features of the novel process to economic performance. Therefore, the merits of the sustainability would be accountable and comparable to the other processes on the same basis [9] .…”