A new asymmetrical mass distribution method on the analysis of universal “force-sensing” model for 3-DOF translational parallel manipulator

Abstract

Purpose – The characteristic of static is quite important especially for the manipulator with force feedback. This paper aims to improve the traditional static model by considering the limitations such as lacking of versatility and ignoring gravity of links. For this purpose, a new asymmetric mass distribution method on the analysis of universal “force-sensing” model has been put forward to overcome the limitations. Design/methodology/approach – Through the forces and torques analysis of every link and the moving platform, the static model of 3-RUU manipulator is acquired. Then, based on the physical meaning analysis of every part in the static model of 3-RUU manipulator, a new asymmetric mass distribution method on the analysis of universal “force-sensing” model can be obtained. Findings – The correctness of the static model of 3-RUU manipulator is verified by simulation results based on Pro/Engineer software and Adams software. Furthermore, experiment results based on a manipulator similar to the Omega.3 manipulator indicate that the universal “force-sensing” model can be applicable to the above manipulator. Originality/value – A new asymmetric mass distribution method on the analysis of universal static mathematical model has been put forward. Based on physical meaning of the above method, the “force-sensing” model can be established quickly and it owns versatility, which can be applicable to the 3-RUU manipulator, the Omega.3 parallel manipulator and other similar manipulators with force feedback. In addition, it can improve the accuracy of the “force-sensing” model to a great extent.

Static Force Analysis of a 3-DOF Robot for Spinal Vertebral Lamina Milling

“…In this paper, a method based on force balance was used to realize human-robot collaboration [19,20]. In addition, a new force sensing model [21][22][23] was referenced in the establishment of the static force model of the asymmetrical parallel robot, and the precision and efficiency could be guaranteed by the force sensing model.…”

Kinematics analysis of a redundantly actuated 4-RUU translational parallel manipulator and its nonredundant 3-RUU counterpart

“…Huda et al 23 analyzed the mobility and Tanabe et al 24,25 analyzed the utility workspace of 3-5R translational parallel mechanism. Yu et al 26 built a static model of 3-RUU translational parallel manipulator through the forces (torques) analysis of every link and the moving platform taking gravity of links into account. Fang and Tsai 27 synthesized the limb structures of translational parallel manipulators, which include the 3-RUU structure.…”

A Review on Robot in Prosthodontics and Orthodontics

“…In 1994, the First International Symposium on Medical Robotics and Computer Assisted Surgery is held in Pittsburgh Pennsylvania, USA. Thus, in many developed countries, such as the United States, Italy, Japan, and other countries, the government and academia focus on the development of medical robot system and deploy plenty of manpower and financial resources on the research field [2,3]. In the past few years, the production value of electronic medical devices, developed on the basis of medical robots system, is growing at 10 percent a year.…”