A New Computational Approach for the Rocking Response of Deformable Bodies Considering Material Nonlinearity

Abstract

Abstract. An increasing interest in the use of rocking members in earthquake resistant structural systems has been observed in recent years. The benefits of such members include the limitation of the damage, re-centering capabilities and reduction of seismic forces transmitted to the rest of the structure due to a yield-like response.Despite the importance of such members, few models able to describe the response of flexible rocking members in structural systems realistically can be found in literature, since most of the research focuses on the response of rigid bodies or ignores the stress nonlinearity near the contact area, which is considered crucial to the accurate determination of the rocking response of deformable rocking bodies. A new macro-element formulation for elastic rocking members has been proposed by the authors in previous papers which is able to take into account this stress nonlinearity, producing results which are very close to the ones produced by conventional finite element programs.Rocking members in structural systems are expected to behave inelastically for large seismic excitations. In this paper, the macroelement presented previously by the authors, which considered the element material to be elastic, is extended to also take material nonlinearity into account. The effect of the nonlinear stress distribution across the rocking interface on the member displacements is determined and approximate formulas for their determination are included in the macro-element formulation. The results produced by the macro-element with the inelastic material are finally compared to the ones of conventional finite element codes, showing very good agreement between the results of the two methods.

A Macro-Element Formulation for the Response of Inelastic Rocking Bodies Under Cyclic Loading

“…This formulation is extended in this paper in order to take material nonlinearity into account, since rocking members are expected to yield during strong seismic events. The monotonic case has been addressed in [20], but cyclic loading, which is examined herewith, is much more complex and needs a different treatment.…”