A New Motor of Stick Type with Coupled Mechanical Vibration of Bimorph Beam and Frictional Force

Yaguchi, Hiroyuki

doi:10.4236/eng.2015.77040

Cited by 1 publication

(4 citation statements)

References 7 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Consideration of newly connection method for multiple cantilever beams to increase generating force of the motor carried out in this paper. The volume and weight of the motor was reduced by approximately 35%, as compared with the previous motor (Yaguchi, 2015). …”

mentioning

confidence: 60%

“…The proposed motor rotates the rotor by picking the silicon rubber, as shown in Figure 3. The rotational principle and simple theoretical formula of the proposed motor has been demonstrated in study (Yaguchi, 2015). …”

Section: Structure Of Motor Having Two Bimorph Cantilever Beamsmentioning

confidence: 99%

“…The motor consists of two bimorph cantilever beams with silicon rubber attached to their tips, a rotor, a bearing, and a steel ball. The size of bimorph beam used in this study was designed to be very small compared with previous study (Yaguchi, 2015). Case of one bimorph beam, no large force is generated.…”

Section: Structure Of Motor Having Two Bimorph Cantilever Beamsmentioning

confidence: 99%

“…However, ultrasonic motors are very expensive, although the cycle of use is short. By another means a stick-type non-magnetic motor manufactured using two bimorph cantilever beams has also been developed (Yaguchi, 2015). The rotation principles and properties of this motor have been demonstrated experimentally.…”

Section: Introducationmentioning

confidence: 99%

See 3 more Smart Citations

Motor Using Mechanical Vibration of Multiple Bimorph Beams

Yaguchi¹

2017

MER

Self Cite

View full text Add to dashboard Cite

The present paper proposes a non-magnetic motor with a rotor rotated by the mechanical resonance energy of four bimorph cantilever beams excited by an electrostatic force. The use of a flexible material such as silicon rubber enables conversion of translational vibration to rotary movement in one direction. The rotational speed of the proposed motor increases in proportion to the input voltage when two bimorph beams are used, and the maximum rotational speed was found to be 6,804 rpm when the input voltage was set to 24.6 V. Next, the basic characteristics of a prototype motor with four bimorph cantilever beams, including rotational speed, output torque, and efficiency, were determined experimentally. The experimental results revealed that a maximum rotational speed of 6,370 rpm was obtained when the output torque was 19.6 μNm. The proposed motor was also observed to produce an output torque of 63.7 μNm when the rotational speed was 1,491 rpm. The maximum efficiency was 6.2% when the input power was 0.3 W. For the proposed motor, the volume and weight were reduced by approximately 35%, as compared with a motor from a previous study.Keywords: motor, frictional force, flexible material, bimorph cantilever beam, resonance, second vibration mode IntroducationThe electromagnetic motor is used widely in medical, welfare and industry. However, an output torque is quite small when the size of the motor becomes small. Therefore, a micro-gear is necessary to increase torque of the motor. In turn, this would require a reducer manufactured with very high precision. On the other hand, non-magnetic motors do not use electromagnets or permanent magnets, and so do not produce electromagnetic waves. More specifically, non-magnetic motors perform stably in high-magnetic-field environments. The demand has increased for non-magnetic motors for generating high torque in strong magnetic fields generated through superconductivity, as well as in medical applications such as magnetic resonance imaging (MRI) and magnetoencephalography. Non-magnetic motors have been discussed for long time. As such, many studies have investigated the mechanisms of motors using non-magnetic devices, such as electrostatic elements (Jian et al., 2006;Xiaolong et al., 2014;Peled et al., 2016;Aoyagi et al., 2016;Yu et al., 2016;Yamamoto et al., 2005; Kurosawa, 1997;Niino et al., 1997), electrorheological fluid (Yokota et al., 2004), shape memory alloys (Sharma et al., 2008), magnetostrictive elements (Pack et al., 2013;Ueno, 2009), the electrostatic optical motor by using PLZT element (Morikawa et al., 2003), and the combination of a frictional force and an electromagnetic force (Maruno et al., 2000;Yaguchi et al., 2014). An ultrasonic motor is being developed as a typical example of a non-magnetic motor, and the design and production techniques of this ultrasonic motor are almost established. However, ultrasonic motors are very expensive, although the cycle of use is short. By another means a stick-type non-magnetic motor manufactured using two bimorp...

show abstract

mentioning

confidence: 60%

Section: Structure Of Motor Having Two Bimorph Cantilever Beamsmentioning

confidence: 99%

Section: Structure Of Motor Having Two Bimorph Cantilever Beamsmentioning

confidence: 99%

Section: Introducationmentioning

confidence: 99%

See 2 more Smart Citations