A New Moving Kirchhoff–Love Plate Element for Dynamic Analysis of Vehicle–Pavement Interaction

Abstract

A new moving Kirchhoff-Love plate element is developed in this work to accurately and efficiently calculate the dynamic response of vehicle-pavement interaction. Since the vehicle can only affect a small region nearby, the wide pavement is reduced to a small reduced plate area around the vehicle. The vehicle loads moving along an arbitrary trajectory is considered, and the arbitrary Lagrangian-Eulerian method is used here for coordinate conversion. The reduced plate area is spatially discretized using the current moving plate element, where its governing equations are derived using Lagrange's equations. The moving plate element is validated by different plate subjected to moving load cases, where the influences of different factors on reduced plate area length of the RBM model are also investigated. Then a vehicle-pavement interaction case with constant and variable speed is analyzed here. The calculation results from the moving plate element are in good agreement with those from the modal superposition method (MSM), and the calculation time with the moving plate element is only one third of that using the MSM. It is also found that the moving load velocity and ground damping have great influences on reduced plate area length of the RBM. The moving plate element is accurate and more efficient than the MSM in calculating the dynamic response of the vehicle-pavement interaction.

Research on dynamic detection method of bridge vehicle load based on optimization algorithm

“…Literature [19] most of China's bridges were built in the 1990s; scientific inspection and damage assessment of old bridges to fully understand the actual condition of old bridges can provide a basis for the economical and reliable use of existing bridges to avoid catastrophic accidents. In literature [20], the dynamic vehicle load, as an important variable load on existing bridges, has parameters that change with time during the service life of the bridge, showing the characteristics of a stochastic process. This paper studies the optimization algorithm to solve the optimization method of bridge vehicle load dynamic detection.…”