A New Research on the Mechanism of Stick-Slip Vibration and the Design of an Auto-Response DOC Controller

Abstract

Stick-slip vibration has been a major problem in drilling operations in B basin, Chad, where rocks in basement formation are hard granite. Premature failure of drill bits and string has profoundly undermined the safe and economical drilling operations. Hence, it is urgent to reveal the mechanism of stick-slip vibration and find a way to eliminate or relieve stick-slip problem. Through the numerical and experimental study on the effects of the cutting parameters on cutting performance, root cause on depth of cut (DOC) or cutting depth is revealed as the mechanism of stick-slip vibration, optimized cutting depths for different rock layers are recommended as well. With it, a novel design of auto-response DOC controller is proposed and those structural parameters are modified and via numerical simulation research. After machining and testing, the structure of the auto-response DOC controller is preliminary determined and it has acquired the satisfactory motion performance and met the testing standards as it can slowly retract into the body by resisting the load and quickly extend outward the body. The auto-response DOC controller and the anti-stick-slip PDC bit have profound application potential in developing the ultra-deep and unconventional reservoirs, especially in this era shocked by low oil price and the pandemic.

Numerical Simulation Study on Vibration Reduction Effect of Flexible Cutting-Tooth Unit

“…As the hardness and plasticity of the rock in deep formations increases, the abrasiveness is increased and the drillability is poor. The drill bit is prone to vibration in these well sections [21][22][23]. The shear stress in the shear plane of the rock is not sufficient to overcome the frictional resistance, so the drill bit initially stops rotating on the rock until the torque and energy transmitted by the drill string continue to the moment the rock can be broken.…”

“…sses 2023, 11, x FOR PEER REVIEW [21][22][23]. The shear stress in the shear plane of the rock is not suffic tional resistance, so the drill bit initially stops rotating on the rock un transmitted by the drill string continue to the moment the rock ca explodes instantaneously, which increases the stress on the tooth su pact between the composite layer and the rock layer, and ultimate such as tooth breakage, tooth fracture and delamination.…”