A New Single-Cell Hybrid Inductor-Capacitor DC-DC Converter for Ultra-High Voltage Gain in Renewable Energy Applications

Abstract

In this paper, a new single-cell hybrid switched inductor DC-DC converter is proposed to demonstrate the verification of ultra-high voltage gain in renewable energy applications (REA). The modification involves adding a single cell of an inductor with a diode and double capacitor to increase voltage transfer gain. Additionally, this modification helps prevent the input current from becoming zero, pulsating at very low duty cycles. The single cell of the hybrid inductor is interleaved with the main switch to reduce current stress when the capacitor of the single-cell inductor charge becomes zero. Moreover, the addition of a modified hybrid switch inductor with a capacitor, operating in dual boosting mode with a single switch, allows the converter to achieve ultra-high voltage gain. The proposed converter offers several advantages, including ultra-high voltage gain, high efficiency, low voltage stress on power MOSFETs, diodes, inductors, and capacitors, as well as low switching and conduction losses. Furthermore, the proposed converter utilizes transformerless and non-coupled inductors. Mathematical equations have been derived for the discontinuous conduction mode (DCM) and continuous conduction mode (CCM) and implemented using Matlab Simulink software to validate the results. In addition, a dual PI controller is designed for the proposed converter to verify the fixed output voltage. Experimental results have also been obtained for a 200 W prototype, with the input voltage varying between 20 V and 40 V, and an output voltage of 200 V at an efficiency of 96.5%.

A High-Efficiency DC-DC Converter Based on Series/Parallel Switched Inductor Capacitors for Ultra-High Voltage Gains

“…In Figure 10b, V C1 is equal to 29 V, which matches Vg. V C2 and V C3 are both 84.7 V, calculated using Equation (36). Additionally, V C4 can be observed to be equal to 169.18 V when the converter supplies a 500 V output voltage at 325 W. V C5 , equal to the output voltage, is also shown.…”

“…A modified DC-DC boost converter was introduced with a coupled inductor for enhanced performance in [1]. For isolation needs, in [6], a full bridge with an isolation transformer interleaved flyback DC-DC converter tors [5,36]. This inadvertently introduces elevated levels of parasitic resistance, limiting their effectiveness in practical applications.…”

Design and implementation of grid tied high step-up DC-DC converter with switched capacitor

“…This system has the advantage of being able to generate high voltages while taking up less space, and it also allows for the regulation of output voltage. Due to its reliable and straightforward implementation, the grid connection system uses the sinusoidal pulse width modulation (SPWM) approach [1]- [5]. This research suggests a brand-new high step-up ratio and clamp-mode converter to achieve high step-up voltage gain and high efficiency.…”

“…And L can be obtained for a given VRF from (5). In this model, we have taken load resistance RL = 20 Ω and load inductance LL = 5 mH.…”