A Numerical Approach to Investigate the Impact of Acid-Asphaltene Sludge Formation on Wormholing During Carbonate Acidizing

Abstract

Carbonate acidization is the process of creating wormholes by injecting acid to increase reservoir permeability and oil production. Nevertheless, some reservoir oils are problematic with low asphaltene stability, which affects the wormholing process. The interactions between acid, rock, and asphaltene lead to acid-asphaltene sludge formation, which reduces oil productivity and acid injectivity. Neglecting this sludge formation, leads to over predicting the depth of the wormhole penetration. Therefore, a numerical model was developed in this study to provide a better understanding of acid-asphaltene sludge formation effect on wormhole creation and propagation in carbonates. A 1D radial model was developed by coupling fluid flow equations in porous media with asphaltene deposition and acid-asphaltene reactions. Then, the developed model was validated and utilized to investigate the effects of different parameters on wormholing including asphaltene presence, acid injection volume and concentration, formation temperature and porosity, and asphaltene concentration. Results showed that acid injection in carbonates with asphaltenic-oils reduces wormhole penetration from 40% to total pore blockage as opposed to reservoirs without asphaltene deposition. The findings also highlighted that shallow wormhole penetration is more pronounced with high volume of acid injection, high porous formations, less diluted acid, and high concentration of asphaltene. In addition, there is an optimum acid injection volume at which wormhole penetration is high and its infiltration is deep into the formation. This is the first work to discuss modeling of acid-asphaltene sludge formation and subsequent wormhole development in carbonates, which is particularly important for problematic crude oils.

Geochemical Modeling of Engineered Water Injection in Carbonates Under Harsh Conditions: New Insights With Ionic Adsorption

“…This low RF from carbonate reservoirs is due to reservoir heterogeneity, complex structures, low permeability, and mixed-to-oil wet condition [2]. Thus, during conventional recovery (primary and secondary) from carbonates, the yield is less than 35% of the original oil in place [3][4]. This leaves a significant volume of oil remains trapped and unswept in these reservoirs.…”

Research on high efficiency and retarded autogenous mud acid for plugging removal in a sandstone reservoir—Example of Bai 823 well area

“…(2) Mathematical model of the acid transport reaction of the subject within the matrix In the case of considering fluid and rock microcompressibility, similar to the form of the acid pressure equation for the antecedent within the matrix, the acid pressure equation for the main body within the matrix is 22,30…”

Geochemical investigation of electrical conductivity and electrical double layer based wettability alteration during engineered water injection in carbonates

“…In carbonate, the maximum oil can be recovered with the injection of CO2 at supercritical conditions (Khurshid and Choe 2016; Khurshid and Fujii, 2021; Khurshid and Afgan 2021b) but it could cause the precipitation/deposition of asphaltene, dissolution of carbonate particles and cementation of asphaltene and dissoluted particles (Khurshid and Choe, 2015; Khurshid et al, 2020); sludge formation (Khurshid et al, 2022b). The injection of water does not cause the formation damages and can successfully maintain reservoir pressure.…”