A Preliminary Laboratory Evaluation of Artificial Aggregates from Alkali-Activated Basalt Powder

Abstract

The widespread use of natural aggregates is one of the main causes of the depletion of natural resources, as aggregates are constituents of several construction materials. Alternatively, it is, today, proven to be feasible to use mining tailings, either natural or recycled materials, to produce artificial aggregates through specific processes. A possible way to produce artificial aggregate is through the alkali activation of the powdered material in a process called geopolymerization. This study proposes to use a basalt powder and two different metakaolins as precursors for the production of an alkali-activated artificial aggregate, with a specific shape and size achieved by using 3D-printed molds. The experimental aggregates were evaluated using traditional tests for natural aggregates, such as resistance to compression, specific density and resistance to abrasion and fragmentation. Furthermore, the material was chemically analyzed in order to evaluate the geopolymerization process promoted by the two adopted metakaolins. The physical tests showed that artificial aggregates do not perform well in terms of resistance to wear and fragmentation, which can be improved. However, they revealed promising results in terms of skid, polishing and micro-texture.

Application of Rock Abrasiveness and Rock Abrasivity Test Methods—A Review

“…The test was performed to verify that the coarse aggregate obtained by crushing marble waste is resistant to abrasion actions between the grains themselves and between grains and external loads. Copetti Callai et al [47] used this method to evaluate the geopolymer material's resistance to abrasion obtained from a mix of activators and precursors. The materials used in these tests, as precursors, were metakaolin and powdered basalt.…”